Danby DDR020BJWDB-ME Dehumidifier Manual

The Danby DDR020BJWDB-ME is a 20-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features a digital humidistat, continuous drain option, auto-restart, washable air filter, auto-defrost, and a 24-hour timer. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Water Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 20-pint water tank, washable filter, continuous drain hose connection, casters for mobility.

Feature	Description
Digital Humidistat	Set desired humidity level from 35% to 85%
Continuous Drain Option	Hose connection for automatic water removal
Auto-Restart	Resumes previous settings after power interruption
Washable Air Filter	Captures dust and particles; reusable
Auto-Defrost	Prevents coil freezing in low temperatures
24-Hour Timer	Program on/off times for energy savings
Full Tank Alert	Indicator light and auto-shutoff when tank is full
Castors	Four wheels for easy room-to-room movement
Power Cord Storage	Built-in compartment for neat storage
Control Lock	Prevents accidental setting changes

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to allow water tank to sit correctly.
Power Connection: Plug directly into a grounded 120V AC outlet. Do not use extension cords.
Initial Ventilation: Allow unit to stand upright for 24 hours if transported on its side.

WARNING! Do not place in areas below 41°F (5°C). Ensure air intake and outlet are not blocked.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert water tank: Slide tank fully into base until it clicks.
Set humidity: Press HUMIDITY button to set desired level (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode based on needs.
Set timer (optional): Use TIMER button to program daily operation schedule.

CAUTION! Handle water tank with care to avoid spills. Ensure filter is clean before first use.

Specifications

Capacity: 20 pints per day (at 80°F, 60% RH).
Coverage Area: Up to 1500 square feet.
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Water Tank Capacity: 1.3 gallons (5 liters).
Power Supply: 115V, 60Hz, 2.5A.
Noise Level: ≤ 51 dB.
Refrigerant: R410A.
Dimensions (HxWxD): 19.3" x 11.4" x 15.4".
Weight: 30.9 lbs.
Certifications: ETL Listed, Energy Star Certified.

Controls and Settings

Access all functions via digital control panel. Front Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Icons: Power, Full Tank, Defrost, Filter Clean, Timer, Humidity Setting, Fan Speed.

Humidity Control: Set between 35%-85% in 5% increments. Fan Speed: HIGH or LOW settings. Modes: CONTINUOUS (runs constantly), AUTO (cycles based on humidity setting). Timer: Program on/off in 1-hour increments up to 24 hours. Filter Alert: Illuminates when filter needs cleaning.

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs constantly until tank is full or turned off.

Press POWER to turn unit on.
Press MODE to select AUTO or CONTINUOUS.
Press HUMIDITY to set desired humidity level.
Press FAN SPEED to select HIGH or LOW airflow.
Press TIMER to set automatic shutoff or startup.

Tip: Use AUTO mode for energy efficiency. Use CONTINUOUS for rapid dehumidification.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Water Tank: Empty when full or every few days. Clean with mild detergent monthly.
Air Filter: Clean every 2 weeks under running water. Allow to dry completely before reinstalling.
Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Coils: Vacuum dust from rear coils every 3 months.
Drain Hose: Flush with clean water monthly if using continuous drain.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Water Drainage Options

Manual Drain: Empty water tank when FULL indicator lights. Continuous Drain: Connect 5/8" ID hose to drain port for automatic drainage.

For manual drainage: Pull tank straight out, carry to sink, pour out water.
For continuous drain: Attach hose to drain port, route to floor drain or sink.
Ensure hose has downward slope without kinks for proper flow.

Note: Unit will not operate with tank removed. Ensure tank is properly seated.

Care & Storage

For seasonal storage: Empty and clean water tank. Clean filter and let dry. Coil drain: Run in fan-only mode for 30 minutes to dry internal components. Store upright in dry location with cord wrapped.

CAUTION! Do not store with water in tank. Protect from dust and moisture.

Regulatory Information

ETL Listed: Meets safety standards. Energy Star Certified: Exceeds energy efficiency guidelines. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. This product contains R410A refrigerant. Dispose of according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power outlet; ensure tank is properly inserted; reset circuit breaker.
Reduced moisture removal	Dirty filter/extreme conditions	Clean air filter; ensure room temperature is between 41°F-95°F.
Water leakage	Tank not seated/hose connection	Ensure tank is fully inserted; check hose for leaks/kinks.
Loud noise	Uneven surface/obstruction	Place on level floor; check for objects touching fan.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if below 41°F.
Filter light on	Dirty filter	Clean filter; press and hold FILTER button for 3 seconds to reset.

Reset: Unplug for 5 minutes, then restart. For persistent issues, contact support.

Service: 1-800-263-2629; www.danby.com