Danby DDR020BJWDB-RF Dehumidifier Manual

The Danby DDR020BJWDB-RF is a 20-pint capacity dehumidifier designed for residential use, featuring a built-in pump for continuous drainage, digital humidity display, auto-defrost function, washable filter, 24-hour timer, and energy-efficient operation. Ideal for rooms up to 500 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Built-in condensate pump, Washable air filter, Removable water bucket, Continuous drainage port, Casters for mobility.

Feature	Description
Capacity	20 pints per day (at 80°F, 60% RH)
Built-in Pump	For continuous upward drainage (up to 15 ft vertical lift)
Digital Humidity Display	Shows current room humidity and set point
Auto-Defrost	Prevents coil freezing in low temperatures
Washable Filter	Captures airborne particles; reusable
24-Hour Timer	Program on/off cycles
Continuous Drainage	Garden hose connection for gravity drain
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
Energy Efficient	ENERGY STAR® certified
Mobility	Four casters for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Install filter: Ensure washable filter is securely in place.
Connect drainage (optional): Attach garden hose to continuous drain port or set up pump drainage.
Plug into dedicated 115V AC outlet.

WARNING! Do not use extension cords. Ensure unit is upright before operating.

First-Time Setup

Plug in unit; control panel will illuminate.

Set desired humidity: Press HUMIDITY SET button to choose between 35%-85% RH.
Select mode: Choose CONTINUOUS, AUTO, or DRY (for laundry) mode.
Set timer (optional): Use TIMER button to program start/stop times.
Check pump setting: Ensure PUMP switch is ON if using continuous drainage.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Model: DDR020BJWDB-RF
Dehumidification Capacity: 20 pints/day (at 80°F, 60% RH)
Room Size: Up to 500 square feet
Power Supply: 115V, 60Hz, 2.5A
Water Bucket Capacity: 1.2 gallons
Pump Lift: Up to 15 feet vertically
Operating Temperature: 41°F to 95°F
Noise Level: ≤ 51 dB
Dimensions (HxWxD): 19.7" x 13.4" x 9.8"
Weight: 30.9 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY SET, FAN SPEED (High/Low), TIMER, PUMP ON/OFF, FILTER RESET.

Display: Current humidity, Set humidity, Timer status, Filter alert, Full bucket indicator.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), DRY (boost mode for laundry areas). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Pump: Switch ON for continuous drainage via pump.

Connecting Drainage

Two drainage options: Gravity drain or pump drain.

Gravity Drain: Attach 5/8" garden hose to drain port at back; ensure hose runs downward.
Pump Drain: Ensure PUMP switch is ON; connect hose to pump outlet; pump can lift water upward.
Bucket Collection: Remove bucket, empty when full, and reinsert securely.

Tip: For continuous operation, use drainage hose. Keep hose free of kinks.

Operation Modes

Designed for efficient moisture removal.

Auto Mode: Unit cycles on/off to maintain set humidity level.
Continuous Mode: Runs constantly until turned off or bucket is full.
Dry Mode: Higher fan speed for rapid dehumidification in damp areas.
Timer: Set to start before you arrive home or stop after you leave.
Pump Operation: Automatically activates when water reaches pump level.

WARNING! Do not operate in temperatures below 41°F without auto-defrost feature enabled.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely, reinstall.
Reset filter indicator: Press FILTER RESET after cleaning.
Empty bucket regularly or use continuous drainage.
Clean exterior with soft, damp cloth.

Care & Cleaning

Unplug unit before cleaning. Clean bucket with mild detergent; rinse thoroughly.

CAUTION! Do not use harsh chemicals, steam, or immerse unit in water. Keep air vents clear.

Regulatory Information

UL Listed; ENERGY STAR® certified. Complies with FCC Part 15 for electromagnetic interference. For Canadian users, complies with ICES-003. Manufactured for Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Ensure plug is secure; check outlet; ensure bucket is properly inserted.
Not removing moisture	Filter clogged, doors/windows open	Clean filter; ensure room is sealed; check that humidity set point is below current level.
Water leaking	Bucket not seated, hose connection loose	Reinsert bucket; check hose connections; ensure unit is level.
Pump not working	Switch off, clogged hose	Turn PUMP switch ON; check hose for blockages; ensure pump outlet is above drain point.
Loud noise	Loose parts, fan obstruction	Ensure unit is on level surface; check for objects near fan; clean filter.
Frost on coils	Low temperature	Auto-defrost should activate; move unit to warmer area if below 41°F.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com