Danby DDR022BSWDB Dehumidifier Manual

The Danby DDR022BSWDB is a 22-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, auto-restart after power interruption, washable air filter, full bucket alert with auto shut-off, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Continuous Drainage 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, water collection bucket, washable filter, continuous drainage port, casters for mobility, and handle.

Feature	Description
Capacity	22 pints per day (at 60°F, 60% RH)
Humidity Control	Auto humidity control from 35% to 85% RH
Digital Display	Shows current humidity, settings, and alerts
Continuous Drainage	Garden hose connection for automatic water removal
Auto Restart	Resumes previous settings after power outage
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Washable Filter	Removable and washable air filter
Timer Function	24-hour on/off timer
Mobility	Four casters and top handle for easy movement
Energy Efficiency	Energy Star certified

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Place unit on level floor, at least 12 inches from walls and furniture.
Ensure proper air circulation: Keep vents unobstructed.
For initial use: Allow unit to stand upright for 24 hours if transported on its side.

WARNING! Do not place near heat sources or in direct sunlight. Ensure room temperature is between 41°F and 95°F for optimal operation.

First-Time Setup

Plug into grounded electrical outlet; follow initial setup steps.

Insert water bucket securely until it clicks into place.
Plug power cord into 115V AC, 60Hz grounded outlet.
Power on: Press POWER button on control panel or remote.
Set desired humidity: Use UP/DOWN buttons to select 35-85% RH.
Select mode: Choose between Continuous, Auto, or Timer mode.

CAUTION! Use only grounded outlet. Do not use extension cord or power strip.

Specifications

Model: DDR022BSWDB
Capacity: 22 pints per day (at 60°F, 60% RH)
Power Supply: 115V AC, 60Hz
Power Consumption: 1.7 Amps, 200W
Operating Conditions: 41°F to 95°F, up to 95% RH
Water Bucket Capacity: 1.2 gallons
Noise Level: ≤ 51 dB
Refrigerant: R-410A
Dimensions: 15.4" W × 11.4" D × 19.7" H
Weight: 30.9 lbs
Certifications: Energy Star, ETL Listed

Controls and Settings

Control Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER indicator, FULL BUCKET indicator.

Display: Shows current room humidity, set humidity, timer settings, and indicator icons.

Humidity Setting: Press UP/DOWN to set target humidity (35-85%). Modes: CONTINUOUS (runs continuously), AUTO (maintains set humidity), TIMER (24-hour programmable). Timer: Set 1-24 hours for automatic on/off. Filter Alert: FILTER light indicates when to clean filter (every 2 weeks). Full Bucket: FULL light and auto shut-off when bucket needs emptying.

Operation Modes

Three operating modes for different needs.

Auto Mode: Maintains set humidity level automatically.
Continuous Mode: Runs continuously until turned off or bucket is full.
Timer Mode: Set to turn on/off at specific times (1-24 hours).

Tip: Use Auto mode for energy efficiency. Use Continuous mode for maximum moisture removal.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty Water Bucket: Remove and empty when FULL light illuminates.
Clean Air Filter: Remove and wash with warm water every 2 weeks. Dry completely before reinstalling.
Clean Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Clean Bucket: Wash with mild detergent monthly to prevent mold/mildew.
Check Drain Hose: Ensure continuous drainage hose is clear if used.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Continuous Drainage

Option for automatic water removal without emptying bucket.

Locate drainage port on back of unit.
Remove drainage port cover.
Connect standard garden hose (¾" diameter, not included).
Route hose to floor drain, sink, or outdoors (downward slope required).
Unit will automatically drain continuously; bucket does not need emptying.

Note: When using continuous drainage, FULL bucket alert will not activate.

Care & Storage

Proper storage when not in use for extended periods.

Unplug unit and empty water bucket completely.
Clean filter and bucket thoroughly; allow to dry completely.
Wrap power cord neatly around cord wraps.
Store upright in cool, dry place.
Cover unit to prevent dust accumulation.

CAUTION! Do not store with water in bucket. Store in temperature above 41°F.

Regulatory Information

ETL Listed: Meets safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. This product contains refrigerant R-410A. For proper disposal, contact local waste authority. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Room temperature too low/high	Ensure room temp is 41-95°F; check filter for blockage.
Full bucket light on	Bucket full or not seated	Empty bucket; ensure properly seated and clicked in place.
Water leakage	Bucket not seated; drain hose issue	Reseat bucket; check drain hose connection; ensure level surface.
Loud noise	Uneven surface; loose parts	Place on level surface; check for loose components.
Filter light on	Dirty filter	Clean filter as per instructions; reset by pressing FILTER button.
Display not working	Power issue	Unplug for 10 minutes; plug back in; if persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com