Danby DDR030EAWDB Dehumidifier Manual

The Danby DDR030EAWDB is a 30-pint capacity dehumidifier designed for residential use. It features automatic humidity control, continuous drainage capability, a 24-hour timer, washable air filter, auto-restart function, and a full tank alert with auto shut-off. Ideal for medium-sized rooms up to 1500 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Water Tank, Air Filter, Air Intake/Outlet Grilles, Continuous Drain Hose Port, Casters for mobility.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room or area with high humidity, away from walls/furniture (minimum 12 inches clearance).
2. Check airflow: Ensure air intake and outlet grilles are unobstructed.
3. Level unit: Adjust feet if necessary to ensure proper operation.
4. Install drain hose (optional): Attach 5/8" inner diameter hose to drain port for continuous drainage.
5. Plug into dedicated 120V AC outlet.

WARNING! Do not use in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; set initial preferences.

1. Insert water tank: Ensure tank is fully seated and empty.
2. Set humidity level: Press HUMIDITY button to select desired RH% (45-50% recommended for comfort).
3. Select fan speed: Choose LOW for quiet operation or HIGH for maximum moisture removal.
4. Set timer (optional): Program ON or OFF time using TIMER buttons.
5. Monitor operation: Check that "Power" and "Compressor" indicator lights are on.

CAUTION! Allow unit to sit upright for 24 hours if transported on its side before first use.

Specifications

• Model: DDR030EAWDB
• Capacity: 30 pints/24 hrs (80°F, 60% RH)
• Coverage Area: Up to 1500 sq. ft.
• Water Tank Capacity: 1.5 gallons (5.7 liters)
• Operating Conditions: 41°F to 95°F (5°C to 35°C)
• Power Supply: 115V, 60Hz, 3.5A
• Refrigerant: R410A
• Noise Level: ≤ 52 dB on High setting
• Dimensions (HxWxD): 19.3" x 13.4" x 9.8"
• Weight: 30.9 lbs
• Certifications: ETL Listed, Energy Star Certified

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED (LOW/HIGH), TIMER (ON/OFF), FILTER ALERT, FULL TANK indicator.

Remote Control (if included): POWER, HUMIDITY, FAN, TIMER, MODE.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Fan Speed: LOW for quiet operation, HIGH for maximum dehumidification. Timer: Program unit to turn ON or OFF after 1-24 hours. Filter Alert: Light illuminates when air filter needs cleaning. Auto Defrost: Automatically activates when coil temperature drops below freezing point.

Operation Modes

Normal Mode: Runs continuously until desired humidity is reached, then cycles on/off. Continuous Mode: Runs continuously regardless of humidity level (for very damp areas). Laundry Mode: Higher fan speed for drying clothes in enclosed space. Smart Mode: Automatically adjusts fan speed based on room conditions.

1. Press POWER to turn unit on.
2. Select mode using MODE button (if available) or set humidity level.
3. Choose fan speed based on need.
4. Monitor water collection; empty tank when FULL light illuminates.

Tip: Close windows and doors for most efficient operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove filter every 2 weeks, wash with mild detergent, rinse, dry completely before reinstalling.
2. Empty water tank: When FULL light comes on, turn unit off, remove tank, empty, replace securely.
3. Clean exterior: Wipe with soft, damp cloth; never use harsh chemicals or abrasives.
4. Clean water tank: Monthly, wash with mild soap solution to prevent mold/mildew.
5. Check drain hose: Ensure continuous drain hose is clear of obstructions if used.
6. Off-season storage: Follow proper storage procedure when not in use for extended periods.

WARNING! Always unplug unit before cleaning or maintenance.

Drainage Options

Two methods for water removal: Manual (bucket) and Continuous (hose).

Manual Drainage: Use included 1.5-gallon bucket. When FULL light illuminates, unit stops. Remove bucket, empty, replace to resume operation.

Continuous Drainage: Attach 5/8" ID hose (not included) to drain port at back. Place hose end in floor drain or suitable outlet. Unit will drain continuously without need to empty bucket.

CAUTION! Ensure hose has downward slope without kinks for proper drainage.

Care & Storage

When storing unit for extended period (more than 2 weeks):

1. Unplug from power outlet.
2. Empty and clean water tank thoroughly.
3. Clean air filter and ensure it's completely dry.
4. Run unit in FAN ONLY mode for 24 hours to dry internal components.
5. Coil power cord and secure with wrap.
6. Store in cool, dry place in original packaging if possible.
7. Cover unit to prevent dust accumulation.

CAUTION! Store upright; do not place heavy objects on top.

Regulatory Information

This product complies with FCC Part 15 Subpart B. This device may not cause harmful interference and must accept any interference received. Certified to UL 474 standards. Energy Star certified for energy efficiency. For support, visit www.danby.com or contact 1-800-263-2629. Manufactured for Danby Products Inc., Mississauga, Ontario, Canada.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. If problem persists, contact service.

Service: 1-800-263-2629; www.danby.com