Danby DDR050BBWDB Dehumidifier Manual

The Danby DDR050BBWDB is a 50-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, 24-hour timer, washable air filter, auto-restart function, and low-temperature operation capability. Ideal for medium to large rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Water tank with full indicator, Continuous drain port, Washable air filter, Casters for mobility, Handle for transport.

Feature	Description
Humidity Control	Automatic humidity sensing with adjustable set point (35%-85%)
Water Tank Capacity	50-pint removable bucket with full indicator and auto-shutoff
Continuous Drainage	Garden hose adapter for permanent drainage option
24-Hour Timer	Programmable on/off timer for energy savings
Air Filter	Washable mesh filter for improved air quality
Auto-Restart	Resumes previous settings after power interruption
Low-Temp Operation	Operates effectively down to 41°F (5°C)
Digital Display	Shows current humidity, set point, timer, and alerts
Control Lock	Prevents accidental setting changes
Portability	Four casters and carrying handle for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls and furniture for proper airflow.
Check filter: Ensure washable air filter is properly installed.
Install casters: Attach all four casters to base if not pre-installed.
Power connection: Plug into dedicated 115V AC outlet.
Drainage setup: Choose between bucket collection or continuous drain hose.

WARNING! Do not operate in temperatures below 41°F (5°C) unless in low-temp mode. Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; follow initial setup procedure.

Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode based on needs.
Set timer: Program 24-hour timer if desired using TIMER button.
Check drainage: Ensure bucket is properly seated or hose is connected securely.
Enable control lock: Press and hold LOCK button for 3 seconds to prevent changes.

CAUTION! Do not place near heat sources or in direct sunlight. Keep children away from unit.

Specifications

Model: DDR050BBWDB
Capacity: 50 pints per day (at 60% RH, 80°F)
Coverage Area: Up to 3000 sq. ft.
Power Supply: 115V AC, 60Hz, 6.5A
Water Tank: 1.8 gallon removable bucket
Noise Level: ≤ 52 dB
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41 lbs
Refrigerant: R410A

Controls and Settings

Access controls via front panel buttons and digital display.

Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, LOCK, FILTER RESET.

Humidity Control: Adjust set point from 35% to 85% in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (cycles based on humidity), DRY (for laundry rooms). Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program on/off cycles in 1-hour increments. Filter Alert: LED indicates when filter needs cleaning. Display: Shows current humidity, set point, timer status, and error codes.

Connecting Drainage

Two drainage options: Water bucket or continuous drain hose.

Bucket drainage: Empty when FULL indicator lights (approximately every 8-12 hours).
Continuous drainage: Remove bucket, attach garden hose to drain port (hose not included).
Hose placement: Ensure hose runs downward without kinks for proper gravity flow.
Check connection: Verify hose is secure to prevent leaks.

Tip: For basement installation, ensure drain hose outlet is lower than dehumidifier drain port.

Operation Modes

Three operating modes for different needs.

AUTO Mode: Unit cycles on/off automatically to maintain set humidity level.
CONTINUOUS Mode: Runs continuously regardless of humidity level.
DRY Mode: Optimized for laundry rooms or areas needing maximum drying.
Timer Operation: Set unit to turn on/off at specific times for energy savings.
Fan Speed Selection: Choose HIGH for faster dehumidification or LOW for quiet operation.
Low-Temp Operation: Automatically adjusts for cooler environments (41°F to 65°F).

WARNING! Do not operate in standing water. Keep unit upright during operation.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean air filter: Remove and wash every 2 weeks or when FILTER light illuminates.
Empty water bucket: Clean with mild detergent monthly to prevent mold/mildew.
Check drain hose: Ensure continuous drain hose is clear of obstructions.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Off-season storage: Empty completely, clean, and store in dry location.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and soft cloth.

CAUTION! Do not immerse in water. Do not use abrasive cleaners. Allow all parts to dry completely before reassembly.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. EPA Refrigerant: Compliant with Section 608 of Clean Air Act. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. Manufactured for Danby Products Inc., Findlay, OH 45840.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full bucket	Check power connection; ensure bucket is empty and properly seated.
Poor dehumidification	Dirty filter/extreme temps	Clean air filter; ensure room temperature is within operating range.
Water leakage	Improper hose connection	Check bucket seating; ensure drain hose is properly connected without kinks.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects touching fan or compressor.
Frost on coils	Low temperature	Unit will auto-defrost; move to warmer area if persistent.
Error codes on display	Various sensor issues	Refer to manual error code chart; unplug for 10 minutes then restart.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com