Danby DDR050BCWDB-ME-6 Dehumidifier Manual

The Danby DDR050BCWDB-ME-6 is a 50-pint capacity dehumidifier designed for medium to large rooms. It features an electronic control panel with digital display, 24-hour timer, continuous drain option, auto-defrost function, washable air filter, and adjustable humidity settings. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital humidity display, Water tank with full indicator, Continuous drain port, Washable air filter, Casters for mobility.

Feature	Description
Capacity	50 pints per day (at 60°F, 60% RH)
Control Panel	Electronic with LED display and touch buttons
Humidity Control	Adjustable from 35% to 85% relative humidity
Timer	24-hour programmable on/off timer
Auto Defrost	Automatically defrosts coils in low temperatures
Continuous Drain	Garden hose connection for continuous operation
Water Tank	Removable bucket with full indicator and auto shut-off
Air Filter	Washable mesh filter for dust and particles
Mobility	Four casters for easy movement
Power Cord	6-foot cord with storage wrap

Installation

Unpack and inspect contents. Place on level surface.

Position unit: Place dehumidifier on a flat, stable surface away from walls and furniture.
Check filter: Ensure air filter is properly installed.
Connect drainage: For continuous operation, attach garden hose to drain port.
Plug into AC power: Use a dedicated 120V outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper clearance for airflow.

First-Time Setup

Plug in unit; follow initial setup steps.

Set humidity level: Press HUMIDITY button to set desired RH (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode.
Set timer: Program 24-hour timer if needed.
Check water tank: Ensure bucket is properly seated.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Model: DDR050BCWDB-ME-6
Capacity: 50 pints/day (at 60°F, 60% RH)
Coverage: Up to 1500 sq. ft.
Power: 115V, 60Hz, 6.5A
Refrigerant: R410A
Water Tank Capacity: 1.8 gallons
Noise Level: 52 dB
Dimensions: 15.4" W x 11.4" D x 24.3" H
Weight: 41.9 lbs
Operating Temp: 41°F to 95°F

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED (LOW/HIGH).

Display: Shows current humidity, set point, timer status, filter alert, and tank full indicator.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), DRY (for laundry rooms). Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Set 1-24 hours for automatic start/stop. Humidity Setting: Adjust in 5% increments from 35% to 85%.

Connecting Drainage

Two drainage options: Water tank or continuous drain.

Water tank: Remove and empty when full indicator lights.
Continuous drain: Attach 5/8" garden hose to drain port; ensure downward slope.
Gravity drain: Place unit higher than drain point for proper flow.

Tip: For basement use, continuous drain is recommended to prevent overflow.

Operating Modes

Supports multiple operating modes for different needs.

AUTO Mode: Unit cycles on/off to maintain set humidity level.
CONTINUOUS Mode: Runs constantly until turned off or tank is full.
DRY Mode: Optimized for drying laundry or wet areas.
Timer Operation: Set to turn on/off at specific times.
Fan Speed: Select LOW for nighttime, HIGH for rapid dehumidification.

WARNING! Do not operate below 41°F without auto-defrost function enabled.

Maintenance

Regular maintenance ensures optimal performance.

Clean air filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank regularly: Clean with mild detergent monthly.
Check drain hose: Ensure no kinks or blockages in continuous drain setup.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.

Care & Cleaning

Unplug before cleaning. Use only mild soap and water; never immerse in water.

CAUTION! Do not use gasoline, thinners, or abrasive cleaners. Keep coils and vents clean for efficiency.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified for energy efficiency. Refrigerant EPA compliant. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power/water tank	Check power connection; ensure tank is properly seated.
Low moisture removal	Filter/temperature	Clean air filter; ensure room temp above 41°F.
Water leakage	Drain hose/tank	Check hose connections; ensure tank is not cracked.
Loud noise	Uneven surface/fan	Place on level surface; check for obstructions in fan.
Display not working	Power surge	Unplug for 5 minutes, then restart.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com