Danby DDR050BDWDB Dehumidifier Manual

The Danby DDR050BDWDB is a 50-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, digital display, 24-hour timer, washable air filter, auto-defrost function, and energy-efficient operation. Suitable for rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Removable water bucket, Continuous drain hose port, Washable air filter, Casters for mobility, Auto-restart function.

Feature	Description
Digital display	Shows current humidity, settings, and alerts
Automatic humidity control	Maintains set humidity level (30%-80% RH)
Continuous drainage option	For hose connection to floor drain or sink
24-hour timer	Program on/off times for energy savings
Washable air filter	Captures dust and particles; reusable
Auto-defrost	Prevents coil freezing in low temperatures
Full bucket alert	Light and sound indication when bucket is full
Power cord storage	Integrated wrap for neat storage
Castors	Easy mobility between rooms
Auto-restart	Resumes previous settings after power interruption

Installation

Unpack and inspect contents. Place on level, stable floor.

Position unit: Allow at least 12 inches clearance on all sides for airflow.
Install air filter: Ensure filter is securely in place before operation.
Check bucket: Ensure water bucket is correctly inserted and locked.
Plug into grounded 120V AC outlet.

WARNING! Do not use extension cords. Ensure outlet is dedicated and properly grounded.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set desired humidity: Use UP/DOWN buttons to select 45%-50% RH for general comfort.
Select mode: Choose between Continuous, Auto, or Timer mode.
Set timer: Program 24-hour on/off schedule if desired.
Check drainage: For continuous use, attach hose to drain port and direct to floor drain.

CAUTION! Operate only in temperatures above 41°F (5°C) for optimal performance.

Specifications

Capacity: 50 pints per day (at 80°F, 60% RH).
Coverage Area: Up to 3000 sq. ft.
Humidity Control Range: 30% to 80% RH (adjustable in 5% increments).
Water Bucket Capacity: 1.8 gallons (with full indicator).
Air Flow: 165 CFM.
Power Consumption: 500W (approx.).
Voltage: 120V AC, 60Hz.
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Noise Level: ≤ 52 dB.
Dimensions (HxWxD): 23.6" x 15.4" x 11.8".
Weight: 40.8 lbs.

Controls and Settings

Access settings via digital control panel. Buttons: POWER, MODE, TIMER, UP/DOWN, FILTER RESET.

Display Icons: Power, Bucket Full, Defrost, Filter Clean, Timer, Continuous Mode, Target Humidity.

Modes: CONTINUOUS (runs non-stop), AUTO (maintains set humidity), TIMER (programmed operation). Settings: Target humidity (30%-80%), 24-hour timer (1-24 hours), filter alert reset. Special Functions: Auto-defrost activates when coil temperature drops; auto-restart after power failure.

Connecting Drainage

For continuous operation, use drain hose (not included).

Turn off and unplug unit.
Remove water bucket.
Attach 5/8" inner diameter hose to drain port at back; secure with clamp.
Route hose to floor drain or sink (ensure downward slope).
Replace bucket; unit will now drain continuously.

Tip: Check hose for kinks monthly to ensure proper drainage.

Operation Modes

Three main operating modes.

Auto Mode: Unit cycles on/off to maintain set humidity level.
Continuous Mode: Runs continuously until turned off or bucket is full.
Timer Mode: Set 1-24 hours for automatic start/stop.

To change mode: Press MODE button repeatedly until desired icon appears. To set humidity: In Auto mode, use UP/DOWN to adjust. To set timer: Press TIMER, then UP/DOWN to set hours.

WARNING! Do not operate in temperatures below 41°F (5°C) without auto-defrost function enabled.

Maintenance

Regular maintenance ensures efficiency and longevity.

Daily: Check and empty water bucket as needed.
Monthly: Clean air filter with warm water and mild detergent; dry completely before reinstalling.
Seasonally: Clean exterior with soft, damp cloth; inspect drain hose for blockages.
Annually: Turn off and unplug; clean evaporator coils gently with soft brush.

Reset filter alert: After cleaning filter, press and hold FILTER RESET for 3 seconds.

Care & Cleaning

Unplug before cleaning. Use soft, damp cloth for exterior; no abrasive cleaners.

Air Filter: Remove, wash in warm soapy water, rinse, air dry completely before replacing.

Water Bucket: Empty and clean with mild detergent monthly to prevent mold/mildew.

CAUTION! Never immerse unit in water. Do not use chemicals on coils.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified for energy efficiency. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. This appliance contains refrigerant R-410A; dispose of according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Ensure plug is secure; check circuit breaker; test outlet.
Reduced dehumidification	Dirty filter/extreme temps	Clean air filter; ensure room temp is above 41°F.
Bucket full light on (bucket not full)	Bucket misaligned	Remove and reinsert bucket; ensure it's seated properly.
Water leaking	Bucket not installed/drain hose leak	Check bucket placement; inspect hose connections.
Loud noise	Loose parts/fan obstruction	Ensure unit is level; check for objects near fan.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.
Display not working	Power issue	Unplug for 1 minute, then restart; contact support if persists.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com