Danby DDR050BIBDB Dehumidifier Manual

The Danby DDR050BIBDB is a 50-pint dehumidifier designed for residential use, featuring an Energy Star rating, digital humidity readout, auto-restart, continuous drain option, washable filter, and quiet operation. It is ideal for medium to large rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, washable air filter, removable water bucket with full-bucket alert, continuous drain hose connection, casters for mobility, and auto-defrost function.

Feature	Description
Digital Humidity Display	Shows current room humidity and set target
Auto-Restart	Resumes previous settings after power interruption
Continuous Drain Option	Allows connection of hose for unattended operation
Washable Filter	Captures airborne particles; can be cleaned
Full-Bucket Alert	LED indicator and auto-shutoff when bucket is full
Quiet Operation	Low noise level for bedrooms and living areas
Energy Star Certified	Energy efficient operation
Auto-Defrost	Prevents coil freezing in low temperatures
24-Hour Timer	Program on/off cycles
Turbo Mode	Maximum moisture removal for high humidity

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 6 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Bucket installation: Insert water bucket securely until it clicks.
Power connection: Plug into a dedicated 120V AC outlet.

WARNING! Do not use extension cords. Ensure unit is upright before operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set target humidity: Press HUMIDITY button to select desired level (35%-85%).
Select mode: Choose between Continuous, Auto, or Turbo mode.
Set timer (optional): Use TIMER button to program start/stop times.
Check operation: Unit will begin dehumidifying; ensure bucket is empty.

CAUTION! Operate within recommended temperature range (41°F - 95°F).

Specifications

Capacity: 50 pints per day (at 60% RH, 80°F).
Coverage Area: Up to 3000 sq. ft.
Power: 120V, 60Hz, 5.5 Amps.
Water Bucket Capacity: 1.8 gallons.
Noise Level: ≤ 52 dB.
Dimensions: 15.4" W x 11.4" D x 24.3" H.
Weight: 41 lbs.
Refrigerant: R-410a.
Certifications: Energy Star, ETL Listed.

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED, TURBO, FILTER RESET.

Display: Shows current humidity, set humidity, timer, filter alert, and full-bucket indicator.

Modes: CONTINUOUS (runs until turned off), AUTO (maintains set humidity), TURBO (maximum dehumidification). Fan Speed: LOW for quiet operation, HIGH for faster moisture removal. Timer: Set 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter to reset alert.

Connecting Drainage

For continuous operation, connect drain hose.

Turn off and unplug unit.
Remove water bucket.
Attach 5/8" inner diameter hose to drain port (hose not included).
Route hose to floor drain or suitable outlet.
Replace bucket; unit will now drain continuously.

Tip: Ensure hose is downward sloping without kinks.

Operation Modes

Supports multiple modes for different humidity conditions.

Auto Mode: Unit cycles on/off to maintain set humidity.
Continuous Mode: Runs constantly until manually turned off or bucket is full.
Turbo Mode: Fan runs at high speed for maximum moisture removal.
Timer Mode: Program unit to turn on/off at specific times.
Auto-Defrost: Automatically activates in low temperatures to prevent coil freezing.

WARNING! Do not operate below 41°F without auto-defrost feature active.

Maintenance

Regular maintenance ensures optimal performance.

Empty bucket: Regularly check and empty water bucket.
Clean filter: Wash filter every 2 weeks under running water; let dry completely.
Clean exterior: Wipe with damp cloth; do not use chemicals.
End-of-season storage: Empty bucket, clean filter, coil, and housing. Store upright in dry place.

Care & Cleaning

Unplug before cleaning. Use soft, damp cloth only; do not immerse in water.

CAUTION! Never use gasoline, solvents, or abrasive cleaners. Keep unit dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Ensure plugged in; check outlet; ensure bucket is properly inserted.
Not dehumidifying	Settings/temperature	Check humidity setting; ensure room temp is above 41°F; clean filter.
Water leakage	Bucket/drain hose	Ensure bucket is seated correctly; check drain hose connection for leaks.
Loud noise	Uneven surface/fan	Place on level floor; check for obstructions in fan area.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.
Ice on coils	Low temperature	Unit will auto-defrost; move to warmer area if persistent.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com