Danby DDR050BL2BDB Dehumidifier Manual

The Danby DDR050BL2BDB is a 50-pint dehumidifier designed for residential use to remove excess moisture from the air. It features adjustable humidity control, automatic shut-off, continuous drainage option, washable air filter, 24-hour timer, and digital controls with LED display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water tank with handle and full indicator, Continuous drain hose connection, Washable air filter, Casters for mobility.

Feature	Description
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Tank	Removable 50-pint capacity with full alert and auto shut-off
Continuous Drainage	Hose connection for unattended operation
Air Filter	Washable mesh filter for air purification
24-Hour Timer	Programmable on/off cycles
Digital Display	LED shows humidity level, settings, and alerts
Auto Restart	Resumes previous settings after power interruption
Defrost Function	Automatic in low temperatures
Turbo Mode	High-speed dehumidification
Power Cord Storage	Integrated wrap for neat storage

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Allow at least 12 inches clearance on all sides for airflow.
Check filter: Ensure washable air filter is properly installed.
Connect drainage: Attach hose to continuous drain port if desired.
Plug into grounded 120V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure room temperature is between 41°F and 95°F for optimal operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button, use arrows to select desired RH% (40-50% recommended).
Select mode: Choose between Normal, Turbo, or Continuous mode.
Set timer: Press TIMER to program on/off schedule.
Monitor operation: LED display shows current room humidity and settings.

CAUTION! Handle water tank carefully; empty before moving unit.

Specifications

Capacity: 50 pints per day (at 60% RH, 80°F).
Coverage Area: Up to 3000 sq. ft.
Tank Capacity: 50 pints (removable).
Operating Conditions: 41°F to 95°F.
Power: 120V, 60Hz, 5.5A.
Noise Level: ≤ 52 dB.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R410a.
Warranty: 1-year limited.

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED, FILTER RESET.

Display Icons: Power, Tank Full, Defrost, Filter, Timer, Humidity %, Mode indicator.

Modes: Normal (energy efficient), Turbo (maximum moisture removal), Continuous (runs until tank full). Humidity Setting: Adjustable 35-85% RH. Timer: 24-hour programmable. Fan Speed: High/Low. Filter Alert: Reminds to clean filter every 250 hours.

Connecting Drainage

For continuous operation, connect drain hose.

Turn off and unplug unit.
Remove drain plug from back panel.
Attach 5/8" inner diameter hose (not included).
Route hose to floor drain or suitable outlet.
Ensure hose has downward slope without kinks.

Tip: When using continuous drain, water tank can remain in place but will not fill.

Operating Modes

Three main operating modes.

Normal Mode: Energy-efficient operation; cycles on/off to maintain set humidity.
Turbo Mode: Runs compressor and fan at maximum for fastest dehumidification.
Continuous Mode: Runs continuously until tank is full (auto shut-off activates).
Defrost Mode: Automatically activates when coil temperature drops below 41°F.
Timer: Set to turn unit on/off at specific times (1-24 hours).

WARNING! Do not operate below 41°F; unit may ice up and reduce efficiency.

Maintenance

Regular maintenance ensures optimal performance.

Empty tank: When full indicator lights, power off, remove and empty tank.
Clean filter: Every 2 weeks or when filter light illuminates; wash with warm water.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
End-of-season: Empty tank, clean filter, dry interior, store upright in dry place.

Care & Cleaning

Unplug before any cleaning. Clean tank with mild detergent; rinse thoroughly.

CAUTION! Do not immerse unit in water. Never use gasoline, solvents, or abrasive cleaners.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified. This product contains refrigerant; dispose of according to local regulations. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	No power/tank full	Check outlet; ensure tank is empty and properly seated.
Low dehumidification	Dirty filter/extreme temps	Clean filter; ensure room temp is 41-95°F.
Water leakage	Misaligned tank/hose	Reinstall tank; check hose connection for continuous drain.
Loud noise	Uneven surface/fan obstruction	Place on level floor; check for debris near fan.
Display not working	Power issue	Unplug for 10 minutes, then reconnect.
Ice on coils	Low temperature	Unit will auto-defrost; move to warmer area if persistent.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com