Danby DDR050BLBDB Dehumidifier Manual

The Danby DDR050BLBDB is a 50-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, 24-hour timer, washable air filter, auto-defrost function, and digital controls with LED display. It operates on 115V/60Hz power and is suitable for areas up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Removable water bucket, Continuous drain port, Washable air filter, Casters for mobility, Auto-restart function.

Feature	Description
Digital Control Panel	LED display with humidity readout and settings
Removable Water Bucket	50-pint capacity with full-bucket indicator
Continuous Drain Port	For hose connection to permanent drainage
Washable Air Filter	Captures dust and airborne particles
Casters	Four wheels for easy mobility
Auto-Defrost	Prevents coil freezing in low temperatures
24-Hour Timer	Programmable on/off cycles
Auto-Restart	Resumes previous settings after power interruption
Humidity Control	Adjustable from 35% to 85% RH
Power Cord Storage	Built-in compartment for cord management

Installation

Unpack and inspect contents. Place on level, stable surface.

Position unit: Allow at least 12 inches clearance on all sides for airflow.
Install casters: Attach four wheels to base (pre-installed on most models).
Check filter: Ensure air filter is properly seated in front grille.
Plug into grounded 115V outlet.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Set desired humidity: Press HUMIDITY button to select 45-50% for typical use.
Select fan speed: Choose HIGH for maximum dehumidification or LOW for quiet operation.
Set timer (optional): Use TIMER button to program automatic shut-off.
Check bucket: Ensure empty and properly inserted.

CAUTION! Handle with care when moving; use two people if unit is filled with water.

Specifications

Capacity: 50 pints per day (at 60% RH, 80°F).
Coverage Area: Up to 3000 sq. ft.
Power: 115V, 60Hz, 6.5A.
Water Bucket: 50-pint removable container with handle.
Noise Level: 52 dB on high setting.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R410a.
Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access controls via digital panel. Front Panel: POWER, HUMIDITY, FAN SPEED, TIMER, MODE.

Display Indicators: Current humidity, Set humidity, Bucket full, Filter clean, Defrost mode.

Humidity Control: Adjust from 35% to 85% RH in 5% increments. Fan Speed: HIGH (fast dehumidification), LOW (quiet operation). Timer: Program 1-24 hours for automatic start/stop. Mode: CONTINUOUS (runs until turned off), AUTO (maintains set humidity).

Connecting Drainage

Continuous drain option for unattended operation.

Turn off and unplug unit.
Remove drain plug from back panel.
Attach 5/8" ID hose (not included) to drain port.
Route hose to floor drain or suitable outlet.
Replace water bucket to activate continuous drainage.

Tip: Ensure hose has downward slope to prevent water accumulation.

Operating Modes

Supports multiple operation modes for different needs.

Auto Mode: Maintains set humidity automatically.
Continuous Mode: Runs continuously regardless of humidity.
Laundry Mode: Maximum dehumidification for drying areas.
Sleep Mode: Reduces fan speed and dims display for nighttime.
Timer Mode: Set 1-24 hours for automatic operation.

WARNING! Do not block air intake or exhaust. Keep children away from unit.

Maintenance

Regular maintenance ensures optimal performance.

Clean air filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water bucket: When full indicator lights, remove and empty bucket.
Clean exterior: Use soft, damp cloth only.
End-of-season storage: Empty bucket, clean filter, coil dry for 24 hours before storing.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only; no abrasive cleaners.

CAUTION! Never immerse unit in water. Do not use chemicals on plastic surfaces.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power/bucket full	Check power connection; empty water bucket; reset circuit breaker.
Poor dehumidification	Filter/temperature	Clean air filter; ensure room temp above 41°F; check for air blockage.
Water leakage	Bucket/drain hose	Ensure bucket properly seated; check drain hose connection.
Loud noise	Leveling/fan	Place on level surface; check for foreign objects in fan area.
Display not working	Power/controls	Check power source; press reset button on control panel.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com