Danby DDR050BLBDB-ME Dehumidifier Manual

The Danby DDR050BLBDB-ME is a 50-pint energy-efficient dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, digital display with humidity readout, 24-hour timer, auto-restart after power interruption, washable air filter, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water tank with full indicator, Continuous drain hose connection, Washable air filter, Casters for mobility, Handle for transport.

Feature	Description
Digital Display	Shows current humidity level and settings
Humidistat	Automatic humidity control from 35% to 85% RH
Continuous Drain Option	Garden hose connection for unattended operation
24-Hour Timer	Program on/off times for energy savings
Auto-Restart	Resumes previous settings after power outage
Washable Air Filter	Removable filter for easy cleaning
Full Tank Alert	Indicator light and auto-shutoff when tank is full
Low-Temperature Operation	Designed to operate in cooler environments
Casters & Handle	Easy mobility between rooms
Energy Efficient	ENERGY STAR® certified model

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Position unit: Allow at least 12-18 inches of clearance on all sides for proper airflow.
Check level: Ensure unit is level for proper water collection in tank.
For continuous drainage: Connect standard garden hose to drain port (hose not included).
Plug into dedicated 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; control panel will illuminate.

Set desired humidity: Press HUMIDITY button to select between 35%-85% RH.
Select fan speed: Choose between HIGH or LOW setting.
Set timer (optional): Program 24-hour on/off schedule.
Check filter: Ensure air filter is properly installed.
Test operation: Unit should begin dehumidifying when humidity exceeds set point.

CAUTION! Handle with care when moving; use both hands and the built-in handle.

Specifications

Capacity: 50 pints per day (at 60% RH, 80°F).
Coverage Area: Up to 3000 sq. ft. in moderate humidity conditions.
Power Requirements: 115V, 60Hz, 6.5A.
Water Tank Capacity: 2.0 gallons (7.6 liters).
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Noise Level: ≤ 52 dB on high setting.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R-410A.
Certifications: ENERGY STAR®, ETL listed.

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, FAN speed (HIGH/LOW), TIMER, FILTER indicator, FULL TANK indicator.

Remote Control (if included): POWER, HUMIDITY, FAN, TIMER, MODE.

Humidity Control: Set desired humidity level (35%-85%). Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program on/off cycles in 1-hour increments. Filter Alert: Indicator lights when filter needs cleaning. Auto Defrost: Automatically activates in low-temperature conditions.

Operating Modes

Normal Mode: Continuous operation until set humidity is reached. Timer Mode: Scheduled operation. Continuous Mode: Runs continuously regardless of humidity level (for very damp conditions).

Press POWER to turn unit on.
Set desired humidity using HUMIDITY buttons.
Select fan speed (HIGH or LOW).
For continuous drainage: Ensure hose is properly connected and directed to drain.
Monitor water tank: Empty when FULL indicator lights.

Tip: For maximum efficiency, keep doors and windows closed in the room being dehumidified.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean air filter every 2 weeks: Remove, wash with mild detergent, dry completely before reinstalling.
Empty water tank regularly: Lift straight up to remove; pour out water; replace securely.
Clean exterior: Use soft, damp cloth only; no abrasive cleaners.
Clean water tank monthly: Use mild detergent, rinse thoroughly.
End-of-season cleaning: Follow storage instructions below.

WARNING! Always unplug unit before cleaning. Never immerse unit in water.

Storage & Winterization

When not in use for extended periods:

Unplug unit from power outlet.
Empty and clean water tank thoroughly.
Clean air filter and ensure it's dry.
Run unit in fan-only mode for 30 minutes to dry internal components.
Coil power cord neatly.
Store in cool, dry place in upright position.
Cover unit to prevent dust accumulation.

CAUTION! Do not store unit on its side or upside down.

Regulatory Information

This dehumidifier complies with FCC Part 15 regulations. ETL listed to UL standard 474. ENERGY STAR® certified. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. This product contains refrigerant that must be recovered by certified technicians.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is empty and properly seated.
Poor dehumidification	Dirty filter/extreme conditions	Clean air filter; ensure room temperature is within operating range.
Water leakage	Improper placement/tank issue	Ensure unit is level; check tank for cracks; ensure drain hose is connected properly.
Loud noise	Loose parts/foreign objects	Check for loose panels; ensure nothing is touching fan blades.
Frost on coils	Low temperature	Auto defrost should activate; if persistent, move to warmer location.
Error codes on display	Various sensor issues	Consult manual error code chart; unplug for 10 minutes then restart.

Reset: Unplug unit for 10 minutes, then restart.

Service: 1-800-263-2629; www.danby.com