Danby DDR050BLPBDB-RF Dehumidifier Manual

The Danby DDR050BLPBDB-RF is a 50-pint dehumidifier designed for residential use, featuring a sleek black cabinet, digital controls, continuous drain option, auto-defrost function, washable filter, and 24-hour timer. It operates on 115V/60Hz power and is ideal for medium to large rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 50-pint moisture removal capacity, built-in humidistat, continuous drain hose connection, washable air filter, full bucket alert with auto-shutoff, and 24-hour programmable timer.

Feature	Description
Digital Control Panel	LED display with touch controls for humidity setting, timer, and mode selection
Continuous Drain Option	Hose connection for unattended operation
Auto-Defrost Function	Prevents coil freezing in low temperatures
Washable Air Filter	Captures airborne particles; reusable
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
24-Hour Timer	Program start/stop times
Humidistat	Automatic humidity control from 35% to 85% RH
Power Cord	6-foot length with storage wrap
Caster Wheels	Easy mobility
Handle	Integrated for bucket removal

Installation & Placement

Unpack and inspect contents. Ensure all parts are present and undamaged.

Choose location: Place on level floor, at least 12 inches from walls and furniture for proper airflow.
Check environment: Operate in temperatures between 41°F (5°C) and 95°F (35°C).
Set up drain hose (optional): Attach 5/8" inner diameter hose to continuous drain port for gravity drainage.
Plug into grounded 115V outlet: Ensure outlet is dedicated and not overloaded.

WARNING! Do not use extension cords. Keep unit upright during movement to avoid refrigerant leakage.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Install filter: Ensure washable filter is correctly seated in front grille.
Set humidity level: Press HUMIDITY button to desired setting (recommended 45-50% for comfort).
Select mode: Choose between Continuous, Auto, or Timer mode.
Check bucket: Ensure bucket is properly inserted and locked in place.

CAUTION! Do not operate without filter. Allow unit to stand upright for 24 hours if tilted during transport.

Specifications

Model: DDR050BLPBDB-RF
Moisture Removal: 50 pints per day (at 80°F, 60% RH)
Coverage Area: Up to 3000 sq. ft.
Power Supply: 115V AC, 60Hz, 5.0A
Water Tank Capacity: 1.6 gallons (6 liters)
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
Weight: 40.8 lbs
Refrigerant: R410A

Controls and Settings

Access controls via digital panel on top of unit.

Control Panel: POWER, MODE (Continuous/Auto/Timer), HUMIDITY (+/-), TIMER (up to 24 hours), FILTER RESET indicator.

Humidity Setting: Adjust from 35% to 85% RH in 5% increments. Timer: Program on/off delay from 1 to 24 hours. Mode Selection: Continuous (runs constantly), Auto (cycles based on humidistat), Timer (operates on programmed schedule). Filter Alert: LED illuminates when filter needs cleaning.

Operation Modes

Three main operating modes for different needs.

Auto Mode: Unit automatically turns on/off to maintain set humidity level.
Continuous Mode: Runs continuously regardless of humidity; use for maximum moisture removal.
Timer Mode: Set start or stop delay (1-24 hours) for energy savings.

Tip: Use Auto mode for everyday operation. Empty bucket promptly when full indicator lights.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely, reinstall.
Empty water bucket: When full, remove bucket, pour out water, replace securely.
Clean exterior: Wipe with damp cloth; do not use abrasive cleaners.
Check drain hose: Ensure continuous drain hose is clear of obstructions.
End-of-season cleaning: Turn off, unplug, clean interior coils with soft brush.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage Instructions

Proper storage prevents damage during off-season.

Clean unit thoroughly as per maintenance section.
Empty and dry water bucket completely.
Coil power cord and secure with wrap.
Store in cool, dry place, protected from dust.
Keep unit upright to prevent refrigerant oil migration.

CAUTION! Do not store with water in bucket to prevent mold/mildew.

Regulatory Information

UL Listed: Meets safety standards for the United States and Canada. Energy Star Certified: Meets energy efficiency guidelines. EPA Refrigerant Compliance: Uses R410A, an environmentally friendly refrigerant. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Reduced moisture removal	Dirty filter/low temps	Clean filter; ensure room temp is above 41°F (5°C).
Water leaking	Bucket not seated/drain hose issue	Reinsert bucket; check hose connection; ensure unit is level.
Loud noise	Loose parts/obstruction	Check for loose panels; ensure unit is on solid surface; clear airflow obstructions.
Filter light on	Dirty filter	Clean filter as instructed; press and hold FILTER button for 3 seconds to reset.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com