Danby DDR050BSPWDB Dehumidifier manual

The Danby DDR050BSPWDB is a 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, 24-hour timer, washable air filter, digital display, and energy-efficient operation. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, removable water bucket, continuous drain hose connection, washable filter, casters for mobility, and auto-defrost function.

Feature	Description
Capacity	50 pints per day (at 80°F, 60% RH)
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Bucket	Removable 1.6-gallon bucket with full indicator and auto-shutoff
Continuous Drain	Hose connection for unattended operation
Timer	24-hour programmable on/off timer
Filter	Washable air filter for improved air quality
Display	Digital display showing humidity level and settings
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Prevents coil freezing in low temperatures
Mobility	Four casters for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to prevent water leakage.
Power Connection: Plug into dedicated 115V AC outlet; avoid extension cords.
Drainage Setup: Install drain hose if using continuous drainage (hose not included).

WARNING! Do not place in areas with temperature below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Initial Run: Allow unit to run for 24 hours to stabilize performance.
Humidity Setting: Set desired humidity level (recommended 45-50% for comfort).
Timer Programming: Set 24-hour timer if needed for energy savings.
Filter Check: Verify filter is clean before first use.

CAUTION! Handle water bucket carefully when removing. Do not operate without filter installed.

Specifications

Model: DDR050BSPWDB
Dehumidification Capacity: 50 pints/day (at 80°F, 60% RH)
Water Bucket Capacity: 1.6 gallons
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Humidity Control Range: 35% to 85% RH
Power Requirements: 115V, 60Hz, 4.5A
Air Flow: 165 CFM
Noise Level: 51 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A

Controls and Settings

Control Panel: POWER, MODE, FAN SPEED, TIMER, HUMIDITY SET, FILTER RESET.

Display Indicators: Current humidity, set humidity, timer, filter alert, bucket full, defrost mode.

Humidity Setting: Press HUMIDITY SET to adjust between 35-85%. Fan Speed: LOW/HIGH settings. Mode: Continuous or Auto (maintains set humidity). Timer: Program on/off times in 1-hour increments. Filter Reset: Press after cleaning filter to reset indicator.

Operation Modes

Auto Mode: Maintains set humidity level automatically. Continuous Mode: Runs continuously until turned off or bucket is full.

Power On: Press POWER button.
Select Mode: Press MODE to choose Auto or Continuous.
Set Humidity: In Auto mode, set desired humidity level.
Fan Speed: Select LOW for quiet operation or HIGH for maximum dehumidification.
Timer: Set to turn unit on/off at specific times.

Tip: Use Auto mode for energy efficiency. Continuous mode is best for very damp conditions.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Water Bucket: Empty regularly; clean with mild detergent monthly.
Air Filter: Clean every 2 weeks or as needed; wash with warm water and mild detergent.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Coils: Vacuum condenser coils every 3 months to remove dust.
Drain Hose: Check for clogs if using continuous drainage.

WARNING! Always unplug unit before cleaning. Do not immerse in water.

Drainage Options

Bucket Drainage: Manual emptying when full indicator lights. Continuous Drainage: Connect 5/8" ID hose to drain port (hose not included).

For Continuous Drain: Place unit near floor drain or sink.
Remove bucket and attach hose to drain port.
Ensure hose runs downward without kinks.
Unit will drain continuously without needing bucket emptying.

Note: When using continuous drain, bucket full indicator will not activate.

Care & Storage

When not in use for extended periods:

Unplug unit and empty water bucket completely.
Clean filter and bucket; allow to dry completely.
Wrap power cord neatly.
Store in dry, cool place away from direct sunlight.
Cover unit to prevent dust accumulation.

CAUTION! Do not store with water in bucket. Store in upright position.

Regulatory Information

UL Listed. EPA compliant. This product contains refrigerant that must be disposed of properly by certified technicians. For technical support, visit www.danby.com or contact 1-800-263-2629. Manufactured for Danby Products Inc.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/bucket full	Check power connection; empty water bucket; ensure filter is clean.
Poor dehumidification	Room temperature/low humidity	Ensure room temp is 41-95°F; check humidity setting; clean filter.
Water leakage	Bucket not seated/unit not level	Ensure bucket properly inserted; check unit is level; inspect drain hose.
Loud noise	Loose parts/fan obstruction	Check for loose panels; ensure nothing obstructing fan; place on level surface.
Display not working	Power issue	Check power outlet; reset circuit breaker; unplug for 10 minutes then restart.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com