Danby DDR050BSWDB Dehumidifier Manual

The Danby DDR050BSWDB is a 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, digital controls, auto-restart function, washable air filter, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, removable water bucket, continuous drain hose connection, washable air filter, casters for mobility, and auto-defrost function.

Feature	Description
Capacity	50 pints per day (at 60°F, 60% RH)
Humidity Control	Automatic with adjustable set point (35%-85%)
Water Removal	Removable 1.8-gallon bucket with full alert
Continuous Drain	Hose connection for unattended operation
Air Filter	Washable mesh filter for improved air quality
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Prevents coil freezing in low temperatures
Digital Display	Shows current humidity, settings, and alerts
Timer Function	24-hour programmable on/off timer
Mobility	Four swivel casters for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Remove packaging materials and tape from unit.
Position dehumidifier at least 12 inches from walls and furniture for proper airflow.
Ensure unit is placed on a level surface to prevent water leakage.
Install casters if not pre-installed (follow included instructions).
For continuous drainage: Connect 5/8" ID hose to drain port (hose not included).

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Plug into dedicated 115V outlet; follow initial setup procedure.

Power on unit: Press POWER button on control panel.
Set desired humidity: Use UP/DOWN buttons to select 45-50% for optimal comfort.
Check bucket: Ensure empty bucket is properly seated and locked in place.
Test operation: Allow unit to run for 15 minutes to verify cooling and dehumidification.
Set timer if desired: Program on/off times using TIMER button.

CAUTION! Use only grounded outlet. Do not use extension cord. Allow unit to sit upright for 24 hours if transported horizontally.

Specifications

Model: DDR050BSWDB
Dehumidification Capacity: 50 pints/day (at 60°F, 60% RH)
Water Bucket Capacity: 1.8 gallons (6.8 liters)
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Power Requirements: 115V, 60Hz, 5.0A
Air Flow: 165 CFM (cubic feet per minute)
Refrigerant: R410A
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Warranty: 1-year parts and labor

Controls and Settings

Digital control panel located on top front of unit.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (High/Low), TIMER, FILTER RESET, CONTINUOUS mode.

Humidity Control: Adjustable 35%-85% in 5% increments. Fan Speed: High for maximum moisture removal, Low for quiet operation. Timer: Programmable 24-hour on/off schedule. Continuous Mode: Runs continuously regardless of humidity level. Filter Alert: LED indicates when filter needs cleaning. Bucket Full: Red LED and audible alert when bucket needs emptying.

Operation Modes

Three main operating modes: Auto, Continuous, and Laundry.

Auto Mode: Unit cycles on/off to maintain set humidity level (default).
Continuous Mode: Runs continuously until manually turned off or bucket fills.
Laundry Mode: High fan speed for drying clothes in enclosed space.
Timer Operation: Set specific on/off times for energy savings.

Tip: For maximum efficiency, keep doors and windows closed during operation.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty water bucket: When full indicator lights or unit stops.
Clean air filter: Remove and wash every 2 weeks or as needed.
Reset filter indicator: Press FILTER button for 3 seconds after cleaning.
Clean exterior: Wipe with damp cloth, then dry.
End-of-season storage: Empty bucket, clean filter, let dry completely, cover unit.

WARNING! Always unplug unit before cleaning or maintenance. Do not use harsh chemicals.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only.

Cleaning Steps:

Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Air Filter: Remove, wash with warm water and mild detergent, air dry completely.
Water Bucket: Empty, wash with mild detergent, rinse thoroughly.
Grille and Vents: Use soft brush to remove dust buildup.

CAUTION! Never immerse unit in water. Do not use gasoline or solvents for cleaning.

Regulatory Information

UL Listed. CSA Certified. Meets U.S. Department of Energy efficiency standards. This product contains refrigerant that must be recovered by certified technicians. For disposal, consult local regulations. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/bucket full	Check power outlet; ensure bucket is empty and properly seated.
Poor dehumidification	Room too cold/filter dirty	Ensure room temperature above 41°F; clean air filter.
Water leakage	Uneven surface/bucket not seated	Level unit; ensure bucket is properly installed and locked.
Loud noise	Loose parts/obstruction	Check for loose panels; ensure nothing is touching fan.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer location if persistent.
Filter light on	Dirty filter	Clean air filter and reset indicator.
Continuous drain not working	Hose blockage/elevation issue	Clear hose; ensure downward slope from drain port.

Reset: Unplug for 5 minutes, then restart if unit malfunctions.

Service: 1-800-263-2629; www.danby.com