Danby DDR050EAWDB Dehumidifier Manual

The Danby DDR050EAWDB is a 50-pint energy-efficient dehumidifier designed for medium to large rooms. It features automatic humidity control, a continuous drain option, a built-in humidistat, a 24-hour timer, a washable air filter, an auto-defrost function for low-temperature operation, a full-bucket alert with auto-shutoff, and a digital display with touch controls. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Removable water bucket, Continuous drain hose port, Washable air filter, Casters for mobility, Full-bucket indicator.

Feature	Description
Digital Control Panel	Touch buttons for settings and mode selection
Removable Water Bucket	Easy-to-carry 50-pint capacity bucket with handle
Continuous Drain Port	For hose connection to allow unattended operation
Washable Air Filter	Captures dust and particles; can be cleaned
Casters	Four wheels for easy room-to-room movement
Full-Bucket Alert	LED indicator and audible alarm when bucket is full
Auto-Defrost Function	Prevents coil freezing in low temperatures
24-Hour Timer	Program on/off cycles for energy savings
Automatic Humidity Control	Maintains set humidity level (30%-80% RH)
Auto-Restart	Resumes previous settings after a power outage

Installation & Placement

Unpack and inspect contents. Place on a flat, stable surface.

Positioning: Place at least 6-12 inches away from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to allow bucket to seat properly and trigger shutoff.
Ambient Temperature: Operate within 41°F to 95°F (5°C to 35°C) for optimal performance.
Power Connection: Plug directly into a grounded 115V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Do not place in tight enclosures or block air vents. Ensure the unit is upright for at least 24 hours before first use if it was tilted during transport.

First-Time Setup

Plug in the dehumidifier; the control panel will illuminate.

Install the Water Bucket: Slide bucket into place until it clicks.
Set Humidity Level: Press the HUMIDITY button and use +/- to set desired level (recommended 45-50% for comfort).
Select Fan Speed: Press FAN button to choose between HIGH and LOW speed.
Set Timer (Optional): Press TIMER to program automatic start/stop times.
For Continuous Drain: Connect a standard garden hose (¾") to the drain port if desired.

CAUTION! Handle the water bucket with care to avoid spills. Ensure the bucket is correctly installed before operation.

Specifications

Model: DDR050EAWDB
Dehumidification Capacity: 50 pints per day (at 80°F, 60% RH)
Power Supply: 115V AC, 60Hz
Power Consumption: 4.0 Amps
Operating Temperature Range: 41°F to 95°F (5°C to 35°C)
Water Bucket Capacity: 50 pints (removable)
Air Flow: High/Low fan speeds
Humidity Control Range: 30% to 80% Relative Humidity (RH)
Dimensions (HxWxD): Approx. 24" x 15" x 12"
Weight: Approx. 40 lbs
Refrigerant: R-410A

Controls and Settings

Access all functions via the digital control panel on top of the unit.

Control Panel: POWER, HUMIDITY (+/-), FAN (High/Low), TIMER (1-24 hrs), MODE (Continuous/Target Humidity), FILTER ALERT (Reset).

Display Icons: Power, Bucket Full, Target Humidity, Fan Speed, Timer, Filter Alert, Defrost.

Key Settings: Target Humidity (set desired level), Fan Speed (HIGH for faster dehumidification, LOW for quiet operation), Timer (delay start or auto-off), Continuous Mode (runs constantly until turned off or bucket is full).

Operation Modes

Automatic (Target Humidity) Mode: Unit runs until the set humidity level is reached, then cycles on/off to maintain it.

Continuous Mode: Unit runs constantly, ignoring the humidistat setting. Ideal for very damp conditions or when using the continuous drain hose.

Timer Mode: Set to turn the unit ON or OFF after 1-24 hours. Useful for scheduling operation.

Auto-Defrost Mode: Automatically activates when coil temperature drops near freezing. The compressor will pause, and the fan may continue until coils thaw.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Cleaning the Air Filter: Remove and wash the filter with warm, soapy water every 2 weeks or as needed. Let dry completely before reinstalling. Press and hold FILTER button for 3 seconds to reset the filter alert.
Emptying the Water Bucket: When the "Bucket Full" indicator lights and the unit shuts off, remove the bucket, empty it, and reinsert securely.
Cleaning the Exterior: Unplug unit. Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals or abrasives.
Cleaning the Bucket: Periodically clean the bucket with mild detergent to prevent mold or mildew.

WARNING! Always unplug the dehumidifier before performing any maintenance.

Draining Options

Bucket Drainage (Manual): Standard method. Empty the bucket when full.

Continuous Drainage (Automatic):

Ensure the unit is unplugged and the bucket is removed.
Locate the drain port on the back of the unit.
Connect a standard ¾" garden hose (not included). Ensure hose runs downward to a floor drain, sink, or sump pump.
Replace the bucket. The unit will now drain continuously, and the bucket full alert will not activate.

Tip: For continuous drainage, place the unit on a stable surface higher than the drain point to ensure proper water flow.

Care & Storage

When not in use for an extended period:

Unplug the unit.
Empty and thoroughly clean the water bucket. Let it air dry.
Clean the air filter and let it dry.
Coil the power cord neatly.
Store the unit upright in a cool, dry place. Cover to prevent dust accumulation.

CAUTION! Do not store the unit in areas subject to freezing temperatures. Ensure it is completely dry before storage.

Regulatory Information

This dehumidifier complies with relevant U.S. safety and performance standards. Copyright © Danby Products Inc. For support, visit www.danby.com or contact customer service at 1-800-263-2629. This appliance contains refrigerant R-410A. Dispose of according to local regulations. Do not puncture the refrigerant circuit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power, bucket not seated, full bucket	Ensure unit is plugged in; check outlet; reseat empty bucket; press POWER.
Little or no water collection	Low humidity, cold room, dirty filter	Check room humidity/temp; clean air filter; ensure vents are not blocked.
Unit runs but air feels warm	Normal operation in defrost mode	Wait for auto-defrost cycle to complete (up to 10 mins).
Loud or unusual noise	Unit not level, loose parts, fan hitting obstruction	Place on level surface; check for loose panels; ensure filter is installed correctly.
Bucket full light on but bucket is empty	Bucket float switch stuck or misaligned	Remove and reinsert bucket firmly; check for obstruction in switch mechanism.
Error code "E1" or "E2" on display	Sensor fault	Unplug unit for 5 minutes, then restart. If persists, contact service.

Reset: Unplug the unit for 5 minutes to reset the electronic controls.

Service: 1-800-263-2629; www.danby.com