Danby DDR050EBPWDB Dehumidifier Manual

The Danby DDR050EBPWDB is a 50-pint energy-efficient dehumidifier designed for residential use. It features automatic humidity control, a continuous drain option, a full-tank alert with auto-shutoff, a washable air filter, a 24-hour timer, and quiet operation. Ideal for rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Air Filter, Water Tank, Drain Hose Connector, Casters, Handle.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment
Water Tank	Removable 50-pint capacity with full-tank alert
Continuous Drain	Option for hose connection (hose not included)
Air Filter	Washable mesh filter for improved air quality
Timer	24-hour programmable on/off timer
Control Panel	Digital display with touch controls
Auto Restart	Resumes previous settings after power interruption
Quiet Operation	Low-noise design for bedrooms and living areas
Portability	Built-in handle and casters for easy movement
Energy Efficient	ENERGY STAR® certified

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls for proper airflow.
Check filter: Ensure air filter is properly installed.
Connect power: Plug into a dedicated 115V AC outlet.
Drain setup: Choose between water tank or continuous drain hose.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Plug in unit; follow initial setup steps.

Set humidity level: Press HUMIDITY button to select desired RH% (30%-80%).
Select mode: Choose between CONTINUOUS, AUTO, or DRY modes.
Set timer: Use TIMER button to program on/off schedule if needed.
Check tank: Ensure water tank is empty and properly seated.

CAUTION! Handle water tank with care to avoid spills. Unit must be upright during operation.

Specifications

Model: DDR050EBPWDB
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage: Up to 3000 sq. ft.
Power Supply: 115V AC, 60Hz
Amperage: 5.0A
Water Tank Capacity: 1.6 gallons
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 24.0" x 15.0" x 11.0"
Weight: 41 lbs
Refrigerant: R-410A

Controls and Settings

Access controls via digital panel. Buttons: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display: Shows current humidity, set point, mode, timer status, filter alert, and full-tank indicator.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), DRY (max moisture removal). Fan Speeds: HIGH, LOW, QUIET. Humidity Setting: Adjustable from 30% to 80% RH. Timer: Program on/off in 1-hour increments up to 24 hours. Filter Alert: Reminder to clean filter after 250 hours of operation.

Connecting Drain Hose

For continuous drainage (optional).

Turn off and unplug unit.
Remove water tank and locate drain outlet on back.
Attach 5/8" inner diameter hose (not included) securely.
Route hose to floor drain or suitable container.
Replace water tank; plug in and restart unit.

Tip: Ensure hose is downward sloping without kinks to prevent water backup.

Operating Modes

Supports multiple dehumidification modes.

AUTO Mode: Unit cycles on/off to maintain set humidity level.
CONTINUOUS Mode: Runs continuously until turned off or tank is full.
DRY Mode: Maximum dehumidification for very damp conditions.
Timer Operation: Set unit to turn on/off at specific times.
Fan Speed: Adjust between HIGH (fast dehumidification), LOW (standard), QUIET (night use).

WARNING! Do not operate in temperatures below 41°F. Frost may form on coils.

Maintenance

Regular maintenance ensures optimal performance.

Clean Air Filter: Remove and wash with warm, soapy water every 2 weeks or as needed. Dry completely before reinstalling.
Empty Water Tank: When full-tank indicator lights, turn off unit, remove tank, and empty. Replace securely.
Clean Exterior: Wipe with damp cloth. Do not use harsh chemicals.
End-of-Season Storage: Empty tank, clean filter, let unit dry, coil cord, and store in dry place.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and soft cloth.

CAUTION! Never immerse unit in water. Do not use abrasive cleaners. Ensure unit is completely dry before plugging in.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ENERGY STAR® certified. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not dehumidifying	Filter clogged / low temp	Clean filter; ensure room temp is above 41°F.
Water tank full light on	Tank full / not seated	Empty tank; ensure tank is properly inserted.
Unit cycling too often	High humidity setting	Adjust humidity set point higher (e.g., 50% RH).
Unusual noise	Loose parts / debris	Ensure unit is level; check for obstructions near fan.
Error code on display	Sensor / system fault	Unplug for 5 minutes, then restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com