Danby DDR060BMP2WDB Dehumidifier Manual

The Danby DDR060BMP2WDB is a 60-pint capacity dehumidifier designed for residential use, featuring a built-in pump for continuous drainage, electronic controls with digital display, auto-restart function, washable filter, 24-hour timer, and adjustable humidity settings. Ideal for basements, living areas, and other spaces up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Built-in condensate pump, Washable air filter, Removable water bucket, Continuous drainage hose, Casters for mobility.

Feature	Description
Capacity	60 pints per day (at 80°F, 60% RH)
Built-in Pump	For upward drainage (up to 16 ft vertical lift)
Digital Controls	LED display with humidity readout and settings
Auto Restart	Resumes previous settings after power interruption
24-Hour Timer	Program on/off cycles
Washable Filter	Removable and reusable air filter
Bucket Full Alert	Indicator light and auto shut-off when bucket is full
Adjustable Humidity	Set desired humidity level from 35% to 85%
Continuous Drain	Option for hose connection (included)
Mobility	Four swivel casters for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to allow bucket to seat properly and trigger shut-off.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.
Drainage Setup: Choose bucket collection or connect hose for continuous drainage.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure area is free of obstructions.

First-Time Setup

Power on dehumidifier; configure initial settings.

Install Filter: Ensure washable filter is properly seated in the front grille.
Set Humidity: Press HUMIDITY button to set desired level (start at 50%).
Select Mode: Choose between Continuous, Auto, or Timer mode.
Check Drainage: Place bucket correctly or attach drainage hose if using continuous drain.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt more than 45°.

Specifications

Model: DDR060BMP2WDB
Dehumidification Capacity: 60 pints/day @ 80°F, 60% RH
Power Supply: 115V AC, 60Hz, 6.5A
Coverage Area: Up to 3000 sq. ft. (depending on conditions)
Water Bucket Capacity: 15.8 pints (removable)
Pump Lift: Up to 16 feet vertically
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 24.4" x 15.4" x 13.8"
Weight: 47.8 lbs
Refrigerant: R410A

Controls and Settings

Access controls via digital panel on top of unit.

Control Panel: POWER, MODE, HUMIDITY (+/-), TIMER, PUMP, FILTER ALERT.

Display Indicators: Current humidity, Set humidity, Timer, Bucket full, Filter clean, Pump active.

Settings: Humidity level (35%-85%), Mode (Continuous, Auto, Timer), Timer (1-24 hours), Pump (On/Off), Filter reset.

Operation Modes

Three main operating modes:

Continuous Mode: Runs continuously until turned off or bucket is full.
Auto Mode: Automatically turns on/off to maintain set humidity level.
Timer Mode: Set 1-24 hour operation cycle; unit turns off automatically.

Tip: Use Auto mode for energy efficiency. The pump runs automatically when continuous drainage is connected.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean Filter: Remove and wash filter every 2 weeks or as needed. Let dry completely before reinstalling.
Empty Bucket: Remove and empty bucket when full or when indicator light comes on.
Clean Exterior: Wipe with soft, damp cloth. Do not use harsh chemicals.
Clean Condenser Coils: Use soft brush to remove dust annually (unplug first).
Reset Filter Alert: Press and hold FILTER button for 3 seconds after cleaning filter.

WARNING! Always unplug unit before cleaning or maintenance.

Drainage Options

Two drainage methods available:

Bucket Collection: Standard method using removable 15.8-pint bucket.
Continuous Drainage: Connect included hose to drain port for automatic drainage.
Pump Drainage: Use built-in pump for upward drainage (max 16 ft vertical lift).

For Continuous Drain: Attach hose securely to drain port, place other end in floor drain or sink. Ensure hose has downward slope without kinks.

Care & Storage

When not in use for extended periods:

Unplug unit and empty bucket completely.
Clean filter and let dry.
Clean interior and exterior surfaces.
Coil drain hose neatly if attached.
Store in upright position in dry, covered area.

CAUTION! Do not store with water in bucket. Protect from dust and moisture.

Regulatory Information

UL Listed. Meets applicable U.S. safety standards. This product contains refrigerant R410A. For proper disposal, consult local regulations. Do not dispose with household waste. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Filter dirty/Room temp too low	Clean filter; ensure room temp is above 41°F (5°C).
Bucket full light on (bucket empty)	Bucket not seated properly	Remove and reinsert bucket; ensure unit is level.
Pump not working	Clog or air lock	Check hose for kinks/clogs; prime pump by pouring water into bucket.
Unusual noise	Loose parts/Fan obstruction	Check for loose panels; ensure nothing is touching fan.
Error code on display	Sensor/system fault	Unplug for 10 minutes, then restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com