Danby DDR070BDPWDB Dehumidifier Manual

The Danby DDR070BDPWDB is a 70-pint dehumidifier designed for residential use, featuring a digital humidistat, continuous drain option, auto-restart, washable filter, and quiet operation. It helps control moisture levels in basements, living spaces, and other areas up to 4500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, washable air filter, continuous drain hose connection, casters for mobility, and auto-defrost function.

Feature	Description
Digital Humidistat	Precise humidity control from 35% to 85% RH
70-Pint Capacity	Removes up to 70 pints per day at 80°F/60% RH
Continuous Drain	Option for hose connection to drain automatically
Auto-Restart	Resumes previous settings after power interruption
Washable Filter	Removable and reusable air filter
Quiet Operation	Designed for low noise in living spaces
Full Tank Alert	Indicator light and auto-shutoff when tank is full
Timer Function	24-hour programmable on/off timer
Casters	Four wheels for easy mobility
Auto-Defrost	Prevents coil freezing in low temperatures

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls for proper airflow.
Level Surface: Ensure unit is level for proper operation and drainage.
Power Connection: Plug directly into 120V AC, 60Hz grounded outlet.
Drain Setup: Choose between bucket collection or continuous drain hose.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Initial Run: Allow 24 hours for unit to stabilize humidity readings.
Humidity Setting: Press HUMIDITY button to set desired level (45-50% recommended).
Mode Selection: Choose between CONTINUOUS or AUTO mode.
Timer Setup: Program timer if needed using TIMER button.

CAUTION! Do not operate in temperatures below 41°F (5°C).

Specifications

Capacity: 70 pints per day (at 80°F/60% RH).
Coverage Area: Up to 4500 sq. ft.
Humidity Control: Digital humidistat (35%-85% RH).
Water Tank: 70-pint removable bucket with handle.
Air Flow: 165 CFM.
Power: 120V, 60Hz, 6.5 Amps.
Noise Level: ≤ 52 dB.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R-410A.

Controls and Settings

Digital Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, set humidity, timer, full tank, filter alert, defrost mode.

Modes: CONTINUOUS (runs constantly), AUTO (cycles based on humidity setting). Fan Speeds: HIGH, LOW. Timer: 24-hour programmable on/off. Humidity Setting: Adjust in 5% increments from 35% to 85%. Filter Reset: Press after cleaning filter.

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs constantly until turned off or tank is full.

Power On: Press POWER button.
Select Mode: Press MODE to choose AUTO or CONTINUOUS.
Set Humidity: Press HUMIDITY to adjust target level.
Fan Speed: Press FAN to select HIGH or LOW speed.
Timer: Press TIMER to program automatic on/off.

Tip: Use AUTO mode for energy efficiency.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean Filter: Remove and wash filter every 2 weeks; dry completely before reinstalling.
Empty Tank: Empty water bucket when full or as needed.
Clean Exterior: Wipe with damp cloth; do not use chemicals.
Clean Condenser Coils: Use soft brush to remove dust annually.
Check Drain Hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Always unplug unit before cleaning or maintenance.

Draining Options

Two drainage methods: bucket collection or continuous drain.

Bucket Collection: Remove and empty bucket when FULL indicator lights. Continuous Drain: Connect 5/8" ID hose to drain port; ensure downward slope for gravity flow.

Care & Storage

For seasonal storage: Empty and clean tank, clean filter, coil, and exterior. Wrap cord and store upright in dry location.

CAUTION! Do not store with water in tank. Store in temperature above 41°F.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/full tank	Check power connection; empty water tank; reset circuit breaker.
Not removing moisture	Low temperature/filter	Ensure room temp above 41°F; clean filter; check humidity setting.
Water leakage	Improper placement/hose	Ensure unit is level; check hose connections; empty bucket regularly.
Loud noise	Uneven surface/fan	Place on level surface; check for obstructions in fan area.
Display not working	Power/control issue	Unplug for 10 minutes then restart; check outlet power.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com