Danby DDR070BDWDB Dehumidifier Manual

The Danby DDR070BDWDB is a 70-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, washable air filter, auto-defrost, digital controls with LED display, 24-hour timer, and energy-efficient operation. Ideal for basements, living areas, and other spaces up to 4500 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Drainage Options 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, washable air filter, continuous drainage hose, casters for mobility, and auto-restart function.

Feature	Description
Capacity	70 pints per day (at 60°F, 90% RH)
Digital Controls	LED display with humidity readout and settings
Auto Humidity Control	Set desired humidity level (35%-85%)
Continuous Drainage	Garden hose connection for continuous operation
Washable Air Filter	Removable and reusable filter
Auto Defrost	Prevents coil freezing in low temperatures
24-Hour Timer	Program on/off cycles
Full Tank Alert	LED indicator and auto shut-off when tank is full
Power Cord Storage	Built-in cord wrap
Casters	Four wheels for easy mobility

Installation & Setup

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Remove packaging: Remove all tape and protective materials.
Install casters: Attach all four wheels to base (if not pre-installed).
Check filter: Ensure air filter is properly seated.
Power connection: Plug into dedicated 115V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Operation

Power on dehumidifier; follow control panel prompts.

Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
Select fan speed: Choose HIGH or LOW setting.
Timer programming: Set 24-hour timer if needed.
Monitor operation: Check that compressor starts and humidity reading appears.
Continuous drainage: Connect hose if using this option (see section 7).

CAUTION! Allow unit to sit upright for 24 hours if transported on its side.

Specifications

Model: DDR070BDWDB
Capacity: 70 pints per day (at 60°F/90% RH)
Coverage Area: Up to 4500 sq. ft.
Power Supply: 115V, 60Hz, 7.5A
Refrigerant: R410A
Water Tank Capacity: 16.9 pints (2 gallons)
Operating Temperature: 41°F to 95°F
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 46.3 lbs

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, set humidity, fan speed, timer, full tank, filter clean, defrost.

Humidity Control: Set between 35%-85% (increments of 5%). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Program on/off cycles in 1-hour increments. Filter Reset: Press after cleaning filter. Auto Restart: Unit resumes previous settings after power interruption.

Drainage Options

Two drainage methods: Manual (bucket) or Continuous (hose).

Manual drainage: Empty water tank when FULL indicator lights.
Continuous drainage: Attach standard garden hose (¾") to drain port.
Ensure hose runs downward without kinks.
Place drain end lower than dehumidifier base.

Tip: For continuous operation, use hose drainage to avoid frequent emptying.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean air filter: Remove and wash every 2 weeks (or as needed).
Empty water tank: Clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
Check drain hose: Ensure no blockages in continuous drainage setup.
Off-season storage: Follow proper storage procedures (section 10).

WARNING! Unplug unit before any maintenance. Do not immerse in water.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

Set humidity to 45-50% for optimal comfort and efficiency.
Use timer to run during peak humidity hours only.
Keep doors and windows closed while operating.
Ensure proper room insulation.
Clean filter regularly to maintain airflow.

Care & Storage

Proper storage extends unit lifespan.

Unplug and empty water tank completely.
Clean filter and let dry completely.
Clean exterior and coils with soft brush.
Coil power cord and secure with wrap.
Store upright in dry, covered area.
Cover unit to prevent dust accumulation.

CAUTION! Store in temperature-controlled area. Do not place heavy items on top.

Regulatory Information

UL Listed. CSA Certified. Energy Star qualified. This product contains refrigerant that must be recovered by certified technicians. For technical support, visit www.danby.com or contact 1-800-263-2629. Copyright © Danby Products Inc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; empty water tank; reset circuit breaker.
Poor dehumidification	Dirty filter/room temp	Clean air filter; ensure room temperature above 41°F.
Water leakage	Improper hose connection	Check hose for kinks; ensure proper connection to drain port.
Loud noise	Loose parts/uneven surface	Ensure unit is level; check for loose panels or foreign objects.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.
Error codes on display	System fault	Consult manual error code chart; power cycle unit.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com