Danby DDR070EACWDB Dehumidifier Manual

The Danby DDR070EACWDB is a 70-pint dehumidifier designed for residential use, featuring an Energy Star rating, digital humidity display, auto-restart function, continuous drain option, washable air filter, and a 24-hour timer. It operates on 115V, 60Hz power and is suitable for areas up to 4500 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, Continuous drain hose connection, Washable air filter, Casters for mobility, Humidity sensor.

Feature	Description
Digital Humidity Display	Shows current room humidity and set target
Auto-Restart Function	Resumes previous settings after power interruption
Continuous Drain Option	For hose connection to floor drain or sump pump
Washable Air Filter	Captures dust and particles; reusable
24-Hour Timer	Program on/off cycles
Full Tank Alert	Indicator light and auto-shutoff when tank is full
Energy Star Rated	Energy efficient operation
Casters	Four wheels for easy mobility
Handle	For carrying and positioning
Power Cord Storage	Integrated wrap for cord management

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable air filter is properly installed.
Power connection: Plug into a dedicated 115V, 60Hz grounded outlet.
Drainage setup: Choose between water tank collection or continuous drain hose.

WARNING! Do not use extension cords. Ensure unit is upright before operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set target humidity: Press HUMIDITY SET button to desired level (35%-85%).
Select mode: Choose between CONTINUOUS, AUTO, or DRY laundry mode.
Set timer (optional): Use TIMER button to program on/off cycles.
Check drainage: Ensure water tank is empty and properly seated, or connect drain hose.

CAUTION! Operate only within 41°F to 95°F ambient temperature range.

Specifications

Model: DDR070EACWDB
Capacity: 70 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 4500 sq. ft.
Power Supply: 115V, 60Hz, 7.5A
Water Tank Capacity: 16.9 pints (2.1 gallons)
Operating Conditions: 41°F to 95°F, up to 95% RH
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 24.2" x 15.4" x 11.8"
Weight: 46.3 lbs
Refrigerant: R-410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY SET, FAN SPEED (High/Low), TIMER, FILTER RESET.

Display Icons: Power, Full Tank, Filter Clean, Defrost, Target Humidity, Current Humidity, Timer.

Modes: CONTINUOUS (runs until turned off), AUTO (maintains set humidity), DRY (for drying laundry). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Humidity Setting: Adjustable from 35% to 85% in 5% increments.

Connecting Drainage

Two drainage options: Water tank or continuous hose.

Water Tank: Empty when FULL indicator lights; lift and carry to drain.
Continuous Drain: Attach 5/8" inner diameter hose to drain port; route to floor drain or sump pump.
Ensure hose is downward sloping without kinks.

Tip: For continuous operation, use hose drainage to avoid frequent tank emptying.

Operating Modes

Supports multiple dehumidification modes.

Auto Mode: Unit cycles on/off to maintain set humidity level.
Continuous Mode: Runs continuously regardless of humidity.
Dry Laundry Mode: Higher fan speed for drying clothes in enclosed space.
Timer Operation: Set unit to turn on/off after specified hours.
Defrost Cycle: Automatically activates in low temperatures; compressor pauses, fan may run.

WARNING! Do not block air intake or exhaust grilles. Keep children away from unit.

Maintenance

Regular maintenance ensures optimal performance.

Clean Air Filter: Every 2 weeks or as needed; wash with warm water, dry completely.
Empty Water Tank: Regularly to prevent overflow and mildew.
Clean Exterior: Wipe with damp cloth; do not use abrasive cleaners.
End-of-Season Storage: Empty tank, clean filter, coil, and housing; store upright in dry location.

Care & Cleaning

Unplug before cleaning. Use soft, damp cloth only; do not immerse in water.

CAUTION! Do not use gasoline, solvents, or harsh chemicals. Keep water away from electrical components.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified. This product contains refrigerant; dispose of according to local regulations. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	Power issue, full tank, timer set	Ensure plugged in; empty tank; check timer settings.
Reduced dehumidification	Dirty filter, low temperature	Clean filter; ensure room temp above 41°F.
Water leakage	Loose hose, tank not seated	Check hose connection; ensure tank is properly inserted.
Loud noise	Uneven surface, loose parts	Place on level floor; check for obstructions in fan.
Display shows "CF"	Filter needs cleaning	Clean air filter; press FILTER RESET button.
Frost on coils	Low ambient temperature	Unit will auto-defrost; move to warmer area if persistent.

Reset: Unplug for 10 seconds, then restart.

Service: 1-800-263-2629; www.danby.com