Danby DDR3009EE Dehumidifier Manual

The Danby DDR3009EE is a 30-pint capacity dehumidifier designed for residential use. It features an electronic control panel with digital humidity display, automatic humidity sensing, continuous drain option, auto-restart after power interruption, washable air filter, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital humidity display, Water collection bucket, Washable air filter, Continuous drain hose port, Casters for mobility.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Control Panel	Electronic touch controls with LED display
Humidity Control	Auto humidity sensing with adjustable set point (35%-85%)
Timer	24-hour programmable on/off timer
Drainage	Removable bucket with full alert; continuous drain hose option
Air Filter	Washable, removable filter for easy maintenance
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Automatic defrost function for low-temperature operation
Mobility	Four swivel casters for easy movement
Power	115V, 60Hz, standard household outlet

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room away from walls/furniture for optimal airflow.
Clearance: Maintain at least 12 inches clearance on all sides.
Check filter: Ensure washable air filter is properly installed.
Power connection: Plug into dedicated 115V outlet; avoid extension cords.
Bucket placement: Ensure collection bucket is securely inserted.

WARNING! Do not place in tight enclosures or near heat sources. Ensure proper ventilation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to set desired RH% (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode using MODE button.
Set timer (optional): Press TIMER to program on/off schedule.
Check operation: Unit will begin dehumidifying; ensure bucket is empty.
Monitor display: Current room humidity will show on digital display.

CAUTION! Allow unit to sit upright for 24 hours if transported horizontally.

Specifications

Model: DDR3009EE
Capacity: 30 pints per day (80°F, 60% RH)
Power Supply: 115V AC, 60Hz
Current: 3.5 Amps
Water Tank Capacity: 1.5 gallons (bucket)
Operating Temperature: 41°F to 95°F
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 19.7" x 13.4" x 9.8"
Weight: 30.9 lbs
Refrigerant: R410A

Controls and Settings

Electronic Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED (High/Low).

Display Indicators: Current humidity, Set humidity, Timer settings, Bucket full alert, Filter clean reminder.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (cycles based on set point). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Program up to 24 hours for automatic start/stop. Filter Alert: LED illuminates when filter needs cleaning.

Operation Modes

AUTO Mode: Unit runs until set humidity is reached, then cycles on/off to maintain. CONTINUOUS Mode: Runs continuously regardless of humidity level.

Press POWER to turn unit on.
Press MODE to select AUTO or CONTINUOUS.
In AUTO mode, press HUMIDITY to set desired level.
Press FAN to select High or Low speed.
Monitor bucket: Empty when FULL indicator lights or alarm sounds.

Tip: Use CONTINUOUS mode for initial moisture removal in very damp conditions.

Maintenance & Cleaning

Unplug unit before any maintenance.

Empty bucket: Remove and empty water collection bucket regularly.
Clean bucket: Wash with mild detergent monthly; rinse thoroughly.
Filter cleaning: Remove filter every 2 weeks; wash with warm water and mild detergent; air dry completely before reinstalling.
Exterior cleaning: Wipe cabinet with soft, damp cloth; do not use abrasive cleaners.
Grille cleaning: Use vacuum attachment to remove dust from air intake and outlet grilles.

WARNING! Never operate without filter installed. Do not immerse unit in water.

Drainage Options

Bucket Drainage: Standard method; empty when full (approximately every 1.5 gallons). Continuous Drainage: Connect 5/8" ID hose to drain port for unattended operation.

Locate drain port on back of unit.
Remove drain port cover.
Connect standard garden hose (not included).
Route hose to floor drain or suitable drainage area.
Ensure hose has downward slope without kinks.

Note: When using continuous drain, bucket full alert is disabled.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. For support, visit www.danby.com or contact 1-800-263-2629. This product contains refrigerant; dispose of according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	No power/bucket full	Check power outlet; ensure bucket is empty and properly seated.
Poor dehumidification	Dirty filter/closed doors	Clean air filter; ensure room doors/windows are closed.
Water leakage	Improper bucket placement	Remove and reinsert bucket; check for cracks.
Loud noise	Uneven surface/obstruction	Place on level floor; check for objects touching unit.
Display not working	Power issue	Unplug for 5 minutes, then reconnect; check circuit breaker.
Ice on coils	Low temperature	Auto defrost should activate; if persistent, raise room temperature above 65°F.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com