Danby DDR3011 Dehumidifier Manual

The Danby DDR3011 is a 30-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, washable air filter, auto-restart after power interruption, and digital controls with LED display. Ideal for rooms up to 1500 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 30-pint water tank, Continuous drain hose connection, Washable air filter, Casters for mobility, Auto defrost function.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Control Panel	Digital LED display with touch controls
Humidity Control	Auto humidity sensing with adjustable set point (35%-85%)
Water Tank	Full tank indicator and auto shut-off
Continuous Drain	Hose connection for unattended operation
Air Filter	Washable mesh filter for air purification
Auto Restart	Resumes previous settings after power outage
Auto Defrost	Prevents coil freezing in low temperatures
Timer Function	24-hour programmable on/off timer
Mobility	Four swivel casters for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls and furniture for proper airflow.
Level surface: Ensure unit is level to prevent water leakage.
Drainage setup: Attach drain hose to continuous drain port if using continuous drainage.
Power connection: Plug into dedicated 115V AC outlet; avoid extension cords.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert water tank: Ensure empty tank is properly seated.
Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
Select fan speed: Choose HIGH or LOW fan setting.
Timer setup: Program timer if desired using TIMER button.
Continuous drain: Connect 5/8" ID hose to drain port for continuous operation.

CAUTION! Handle water tank carefully to avoid spills. Unit must remain upright during operation.

Specifications

Model: DDR3011
Capacity: 30 pints per day (80°F, 60% RH)
Coverage Area: Up to 1500 square feet
Power Supply: 115V, 60Hz, 3.5A
Water Tank Capacity: 1.8 gallons (6.8 liters)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 19.9" H
Weight: 33 lbs (15 kg)
Refrigerant: R410A

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, MODE, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Fan speed, Timer, Full tank, Filter clean, Defrost mode.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: 24-hour programmable on/off timer. Mode Selection: CONTINUOUS (runs constantly) or AUTO (cycles based on humidity setting). Filter Reset: Reset indicator after cleaning filter.

Operating Modes

AUTO Mode: Unit runs until set humidity is reached, then cycles on/off. CONTINUOUS Mode: Runs continuously regardless of humidity level. LAUNDRY Mode: Maximum dehumidification for drying clothes. SILENT Mode: Reduced fan speed for quiet operation.

Select mode using MODE button.
Monitor current humidity on display.
Empty water tank when FULL indicator lights (or use continuous drain).
Use timer for scheduled operation.

Tip: For energy efficiency, use AUTO mode with humidity set to 45-50%.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean air filter: Remove and wash every 2 weeks; dry completely before reinstalling.
Empty water tank: Empty regularly; clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check drain hose: Ensure continuous drain hose is clear of obstructions.
Off-season storage: Follow proper storage procedures when not in use.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage Instructions

Prepare unit for extended storage.

Unplug unit and empty water tank completely.
Clean air filter and let dry.
Clean water tank and interior surfaces.
Coil power cord neatly.
Store in dry, covered area in upright position.
Cover unit to prevent dust accumulation.

CAUTION! Store in temperature-controlled environment. Do not place heavy objects on unit.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R410A, an environmentally friendly refrigerant. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is empty and properly seated.
Poor dehumidification	Dirty filter/extreme temps	Clean air filter; ensure room temperature is within operating range.
Water leakage	Improper level/damage	Ensure unit is level; check tank for cracks; verify drain hose connection.
Loud noise	Obstructions/loose parts	Check for obstructions; ensure unit is on solid surface; tighten any loose parts.
Display not working	Power surge/component failure	Unplug for 10 minutes then restart; contact service if issue persists.
Ice on coils	Low temperature	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com