Danby DDR4007EE Dehumidifier Manual

The Danby DDR4007EE is a 40-pint capacity dehumidifier designed for residential use, featuring electronic controls, auto-restart, continuous drain option, washable filter, adjustable humidity settings, 24-hour timer, full bucket alert, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, continuous drain hose connection, washable air filter, casters for mobility, and auto-defrost function.

Feature	Description
Capacity	40 pints per day (at 80°F, 60% RH)
Control Panel	Digital display with touch controls
Humidity Control	Adjustable from 35% to 85% relative humidity
Timer	24-hour programmable on/off timer
Auto-Restart	Resumes previous settings after power interruption
Continuous Drain	Garden hose connection for continuous operation
Filter Indicator	LED alert when filter needs cleaning
Full Bucket Alert	Automatic shutoff and indicator when bucket is full
Low Temp Operation	Operates down to 41°F (5°C)
Mobility	Four swivel casters for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Position unit: Place at least 12 inches from walls and furniture for proper airflow.
Check level: Ensure unit is level for proper bucket operation.
Install drain hose (optional): Attach 5/8" garden hose to continuous drain port.
Plug into dedicated 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; allow to stand upright for 24 hours if transported on its side.

Initial power: Press POWER button to turn on unit.
Set humidity: Use UP/DOWN buttons to set desired humidity level (40-50% recommended).
Select mode: Choose between CONTINUOUS or AUTO mode.
Set timer (optional): Program 24-hour timer for automatic operation.
Check filter: Ensure filter is clean and properly installed.

CAUTION! Handle with care when moving; use two people for heavy lifting.

Specifications

Model: DDR4007EE
Capacity: 40 pints per day (80°F/60% RH)
Power Supply: 115V, 60Hz, 4.5A
Water Tank Capacity: 2.1 gallons (8 liters)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A
Certifications: ETL Listed, Energy Star Certified

Controls and Settings

Control Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER indicator, FULL BUCKET indicator.

Display Indicators: Current humidity, Set humidity, Timer settings, Filter alert, Full bucket alert, Defrost indicator.

Humidity Settings: Adjust from 35% to 85% RH in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), DRY CLOTHES (high fan speed). Timer: Program on/off times in 1-hour increments. Filter Reset: Press and hold FILTER button for 3 seconds after cleaning.

Operation Modes

AUTO Mode: Unit runs until set humidity is reached, then cycles on/off automatically. CONTINUOUS Mode: Runs continuously regardless of humidity level. DRY CLOTHES Mode: High fan speed for faster drying.

Select mode using MODE button.
Adjust humidity setting with UP/DOWN buttons.
Monitor current humidity on display.
Unit will auto-defrost when needed in low temperatures.

Tip: For maximum efficiency, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water bucket: When FULL indicator lights, turn off unit and empty bucket.
Clean exterior: Wipe with damp cloth, then dry.
Clean bucket monthly: Wash with mild detergent, rinse thoroughly.
Check drain hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Always unplug unit before cleaning. Never use harsh chemicals or abrasives.

Draining Options

Bucket Method: Unit automatically shuts off when bucket is full. Continuous Drain: Connect 5/8" garden hose to drain port.

For bucket: Empty when FULL indicator lights; reinsert properly.
For continuous drain: Place hose lower than drain port; ensure no kinks.
Gravity drain only: No pump included; proper slope required.

CAUTION! Do not lift bucket by handle when full. Empty over sink or drain.

Care & Storage

When not in use for extended periods:

Unplug unit and empty water bucket completely.
Clean filter and bucket; allow to dry thoroughly.
Wrap cord neatly around cord wraps.
Store upright in dry, protected area.
Cover unit to prevent dust accumulation.

Important: Store in temperature-controlled environment. Do not store on its side.

Regulatory Information

ETL Listed: Meets safety standards. Energy Star Certified: Meets energy efficiency guidelines. FCC Part 15: Class B digital device. This product contains refrigerant; dispose of properly according to local regulations. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Room too cold	Ensure room temperature above 41°F; check humidity setting.
Water leaking	Bucket not seated	Ensure bucket is properly inserted; check for cracks.
Loud noise	Uneven surface	Place on level floor; check for loose parts.
Filter light on	Dirty filter	Clean filter; press and hold FILTER button to reset.
Ice on coils	Low temperature	Unit will auto-defrost; raise room temperature if persistent.
Display not working	Power issue	Unplug for 5 minutes, then restart; check voltage.

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com