Danby DDR4509EE Dehumidifier Manual

The Danby DDR4509EE is a 45-pint energy-efficient dehumidifier designed for medium to large rooms. It features automatic humidity control, continuous drainage capability, a 24-hour timer, washable air filter, auto-restart after power interruption, and a digital display with touch controls. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, 45-pint moisture removal capacity, built-in humidistat, continuous drain hose connection, removable water bucket with full-bucket alert, washable air filter, and caster wheels for mobility.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Positioning: Place at least 6 inches from walls and furniture for proper airflow.
2. Level Surface: Ensure unit is level to prevent water leakage.
3. Drainage Setup: For bucket operation, ensure bucket is properly inserted. For continuous drainage, attach hose to drain port and route to floor drain or sink.
4. Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cords.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure room temperature is above 41°F for optimal performance.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Insert Water Bucket: Push bucket firmly into place until it clicks.
2. Set Humidity Level: Press HUMIDITY button to set desired RH level (recommended 45-50%).
3. Select Fan Speed: Choose LOW or HIGH fan speed using FAN button.
4. Program Timer (Optional): Use TIMER button to set automatic on/off schedule.
5. Continuous Drain (Optional): Connect ½-inch garden hose to drain port for unattended operation.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt more than 45 degrees.

Specifications

• Model: DDR4509EE
• Capacity: 45 pints per day (at 80°F, 60% RH)
• Coverage Area: Up to 1500 sq. ft.
• Water Bucket Capacity: 1.8 gallons
• Humidity Control Range: 30% to 90% RH
• Fan Speeds: 2 (High/Low)
• Power Requirements: 115V, 60Hz, 4.5A
• Refrigerant: R410A
• Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
• Weight: 41 lbs
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Certifications: Energy Star, ETL Listed

Controls and Settings

Access all functions via digital control panel.

Control Panel: POWER, HUMIDITY (+/-), FAN (High/Low), TIMER (1-24 hours), MODE (Continuous/Auto), FILTER RESET indicator.

Humidity Setting: Adjust between 30%-90% RH in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program unit to turn on/off automatically within 24-hour period. Mode: CONTINUOUS runs constantly; AUTO cycles based on humidity setting. Filter Alert: FILTER light illuminates when air filter needs cleaning.

Operation Modes

Two main operating modes: Auto and Continuous.

1. Auto Mode: Unit runs until set humidity is reached, then cycles on/off to maintain level.
2. Continuous Mode: Runs continuously regardless of humidity level (for very damp areas).
3. Timer Operation: Set unit to start/stop at specific times (e.g., run during night hours).
4. Bucket Full Protection: Unit automatically shuts off when bucket is full; "FULL" indicator lights.

Tip: For maximum efficiency, keep doors and windows closed while dehumidifier is running.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty Water Bucket: Regularly empty bucket to prevent overflow and microbial growth.
2. Clean Air Filter: Remove and wash filter every 2 weeks with warm, soapy water. Dry completely before reinstalling.
3. Clean Exterior: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
4. Clean Bucket: Monthly, clean bucket with mild detergent to prevent odors.
5. Check Drain Hose: Ensure continuous drain hose is clear of obstructions.
6. Off-Season Storage: Follow storage instructions when not in use for extended periods.

WARNING! Always unplug unit before performing any maintenance.

Storage Instructions

Proper storage prevents damage during off-season periods.

1. Clean unit thoroughly following maintenance instructions.
2. Empty and dry water bucket completely.
3. Coil power cord and secure with twist tie.
4. Store in upright position in dry, cool location.
5. Cover unit to prevent dust accumulation.

CAUTION! Store in area where temperature remains above freezing.

Regulatory Information

ETL Listed: Meets safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. This product contains refrigerant R410A. For proper disposal, consult local regulations. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Reset: Unplug unit for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com