Danby DDR6011R Dehumidifier Manual

The Danby DDR6011R is a 60-pint capacity dehumidifier designed for residential use, featuring electronic controls, auto-restart, continuous drain option, washable air filter, adjustable humidistat, 24-hour timer, and turbo mode for faster moisture removal. Ideal for areas up to 3000 sq ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, continuous drain hose connection, washable air filter, casters for mobility, and adjustable humidistat.

Feature	Description
Capacity	60 pints per day (at 80°F, 60% RH)
Control Panel	Electronic touch controls with digital display
Humidistat	Adjustable from 35% to 85% relative humidity
Timer	24-hour programmable on/off timer
Turbo Mode	Increases fan speed for faster dehumidification
Auto Restart	Resumes previous settings after power interruption
Continuous Drain	Garden hose connection for continuous operation
Air Filter	Washable mesh filter for air quality
Bucket Full Alert	Indicator light and auto-shutoff when bucket is full
Casters	Four wheels for easy mobility

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Place unit on a flat, level surface with at least 12 inches of clearance on all sides for proper airflow.
Ensure the unit is positioned away from heat sources and direct sunlight.
Install the casters by inserting them into the base slots and pressing firmly until they click into place.
For initial use, allow the unit to stand upright for at least 24 hours if it was tilted during transport.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around the unit.

First-Time Setup

Plug into dedicated 115V AC outlet; follow initial setup steps.

Insert the water bucket securely into the unit until it clicks into place.
Plug the power cord into a grounded 115V electrical outlet.
Press the POWER button to turn on the unit.
Set desired humidity level using the UP/DOWN buttons (recommended initial setting: 50%).
Select operating mode: Normal or Turbo for faster moisture removal.
Program the timer if needed using the TIMER button and UP/DOWN arrows.

CAUTION! Use only a properly grounded outlet. Do not use extension cords.

Specifications

Model: DDR6011R
Dehumidification Capacity: 60 pints/day @ 80°F, 60% RH
Power Supply: 115V, 60Hz, 7.5A
Water Bucket Capacity: 16 pints (2 gallons)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Air Flow: 265 CFM (Turbo mode)
Refrigerant: R410A
Noise Level: 52 dB (Normal mode)
Dimensions (HxWxD): 24.2" x 15" x 13.8"
Weight: 46.3 lbs
Coverage Area: Up to 3000 sq ft

Controls and Settings

Access all functions via electronic control panel. Front Panel: POWER, MODE, TIMER, UP/DOWN buttons, and digital display.

Display Indicators: Power, Bucket Full, Turbo Mode, Timer, Current Humidity, Set Humidity.

Humidity Control: Adjust from 35% to 85% RH using UP/DOWN buttons. Timer: Program 24-hour on/off schedule. Mode Selection: Normal (standard fan speed) or Turbo (high fan speed). Auto Defrost: Automatically activates when coil temperature drops below freezing. Auto Restart: Resumes operation after power outage.

Operating Modes

Normal Mode: Standard dehumidification with moderate fan speed. Turbo Mode: Increased fan speed for faster moisture removal.

Press POWER to turn unit on.
Use UP/DOWN buttons to set desired humidity level (display shows current room humidity).
Press MODE to switch between Normal and Turbo operation.
Press TIMER to program automatic start/stop times (use UP/DOWN to set hours).
Unit will automatically cycle on/off to maintain set humidity level.

Tip: Use Turbo mode initially in very damp conditions, then switch to Normal for maintenance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Air Filter Cleaning: Clean every 2 weeks or as needed. Remove filter, wash with warm water and mild detergent, rinse thoroughly, and air dry completely before reinstalling.
Water Bucket Cleaning: Empty and clean bucket weekly with mild detergent to prevent mold/mildew.
Exterior Cleaning: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
Coil Inspection: Check evaporator coil annually for dust buildup; vacuum if necessary.
End of Season: Clean thoroughly before storage (see Care & Storage section).

WARNING! Always unplug unit before performing any maintenance.

Draining Options

Two methods: Manual bucket emptying or continuous drain.

Manual Draining:

When bucket full light illuminates, unit will automatically shut off.
Remove bucket by pulling handle outward and lifting straight up.
Carry bucket to drain location, pour out water.
Replace bucket securely until it clicks into place.
Unit will automatically resume operation.

Continuous Drain:

Remove drain plug from back of unit.
Attach standard garden hose (¾" diameter) to drain outlet.
Route hose to floor drain or suitable drainage area.
Ensure hose has downward slope without kinks.
Unit will operate continuously without bucket full shutdown.

Care & Storage

Proper storage prevents damage during off-season periods.

Unplug unit from electrical outlet.
Empty and thoroughly clean water bucket.
Clean air filter and allow to dry completely.
Run unit in Fan Only mode for 24 hours to dry internal components.
Coil drain hose (if attached) and store with unit.
Store in upright position in dry, covered area.
Cover unit to prevent dust accumulation.

CAUTION! Do not store unit with water in bucket. Ensure complete dryness before storage.

Regulatory Information

UL Listed: Complies with UL standard 474. Energy Star: Meets Energy Star requirements for energy efficiency. EPA Refrigerant: Uses R410A refrigerant, which is ozone-friendly. Copyright © Danby Products Inc. All rights reserved. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not operating	No power	Check power cord connection; ensure outlet is working; check circuit breaker.
Bucket full light on but bucket not full	Bucket not seated properly	Remove and reinsert bucket until it clicks into place.
Reduced dehumidification	Dirty filter/extreme conditions	Clean air filter; ensure room temperature above 41°F; check for closed doors/windows.
Unit cycles on/off frequently	Humidistat set too high	Lower humidity setting; ensure unit is not near moisture source.
Water leakage	Bucket overflow/improper hose connection	Check bucket seating; ensure continuous drain hose is properly attached without kinks.
Unusual noise	Loose parts/fan obstruction	Ensure unit is level; check for objects near fan intake; tighten any loose panels.
Frost on coils	Low temperature operation	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug unit for 5 minutes, then restart. If problem persists, contact service.

Service: 1-800-263-2629; www.danby.com