Danby DDR60A4GP Dehumidifier Manual

The Danby DDR60A4GP is a high-capacity 60-pint dehumidifier designed for residential use in spaces up to 3000 sq. ft. It features electronic controls, a digital display, automatic humidity sensing, continuous drainage option, auto-restart, washable filter, and a 24-hour timer. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, Water tank with full indicator, Continuous drain port, Washable air filter, Casters for mobility.

Feature	Description
Dehumidification Capacity	60 pints per day (at 80°F, 60% RH)
Coverage Area	Up to 3000 square feet
Digital Controls	Electronic buttons with LED display
Automatic Humidity Control	Set desired humidity level (35%-85%)
Continuous Drain Option	Garden hose connection for unattended operation
Auto-Restart	Resumes previous settings after power interruption
24-Hour Timer	Program on/off cycles
Full Tank Alert	Auto shut-off when tank is full
Washable Filter	Removable and reusable air filter
Mobility	Four swivel casters for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 6 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Power connection: Plug into dedicated 115V AC, 60Hz outlet.
Initial setup: Allow unit to stand upright for 24 hours if transported on its side.

WARNING! Do not use extension cords. Ensure proper ventilation around the unit.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode.
Set timer (optional): Use TIMER button to program on/off schedule.
Check drainage: Ensure water tank is properly inserted or connect continuous drain hose.

CAUTION! Operate only within 41°F to 95°F temperature range for optimal performance.

Specifications

Model: DDR60A4GP
Capacity: 60 pints per day (AHAM verified)
Coverage: Up to 3000 sq. ft.
Power Supply: 115V AC, 60Hz, 6.5A
Water Tank Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Full tank, Filter alert, Mode icons.

Modes: CONTINUOUS (runs continuously), AUTO (maintains set humidity). Fan Speeds: HIGH, LOW. Humidity Setting: Adjustable from 35% to 85% in 5% increments. Timer: Programmable from 1 to 24 hours. Filter Reset: Press after cleaning filter to reset alert.

Connecting Drainage

Two drainage options: Water tank or continuous drain.

Water tank: Slide tank into position until it clicks. Empty when FULL indicator lights.
Continuous drain: Remove drain plug, attach standard garden hose (¾" diameter).
Route hose: Ensure hose runs downward without kinks for gravity drainage.
Select drain mode: Unit automatically detects continuous drainage when hose is connected.

Tip: For basement use, continuous drainage is recommended to prevent frequent emptying.

Operating Modes

Supports multiple operating modes for different needs.

AUTO Mode: Unit cycles on/off to maintain set humidity level.
CONTINUOUS Mode: Runs continuously regardless of humidity level.
Timer Operation: Set unit to turn on/off at specific times.
Fan Only: Press FAN button to circulate air without dehumidifying.
Auto Defrost: Automatically activates in low temperatures to prevent coil freezing.

WARNING! Do not operate below 41°F as ice may form on coils.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely before reinstalling.
Empty water tank: Clean with mild detergent monthly to prevent mold/mildew.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check coils: Keep evaporator and condenser coils free of dust and debris.
Off-season storage: Empty tank, clean unit, coil with cord, store in dry place.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and soft cloth.

CAUTION! Never immerse unit in water. Do not use gasoline, thinners, or abrasive cleaners.

Regulatory Information

UL Listed. EPA Energy Star certified. Complies with FCC Part 15 Class B. This product contains refrigerant that must be recovered by certified technicians. For support, visit www.danby.com or contact 1-800-263-2629. 2-year limited warranty on parts and labor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power outlet; ensure tank is properly inserted; reset circuit breaker.
Low dehumidification	Dirty filter/extreme conditions	Clean filter; ensure room temperature is between 41°F-95°F.
Water leakage	Improper hose connection/tank position	Check hose for kinks; ensure tank is fully seated; tighten connections.
Loud noise	Uneven surface/foreign objects	Place on level surface; check for objects near fan.
Display not working	Power interruption	Unplug for 10 minutes, then reconnect; check power source.
Ice on coils	Low temperature	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com