Danby DDR6510E Dehumidifier Manual

The Danby DDR6510E is a 65-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, 24-hour timer, washable air filter, auto-restart after power interruption, and low-temperature operation capability. It effectively removes excess moisture from the air to improve comfort and protect your home from mold and mildew. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Continuous Drainage Setup 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Water tank with full indicator, Continuous drainage port, Washable air filter, Casters for mobility, Handle for transport.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment
Water Tank Capacity	65-pint removable bucket with full indicator
Continuous Drainage	Garden hose connection for continuous operation
24-Hour Timer	Programmable on/off timer
Air Filter	Washable filter for improved air quality
Auto-Restart	Resumes previous settings after power outage
Low-Temp Operation	Operates effectively in cooler temperatures
Digital Display	Shows current humidity, settings, and alerts
Mobility	Four casters and carrying handle for easy movement
Energy Efficient	Energy Star certified for reduced power consumption

Installation & Setup

Unpack and inspect contents. Place on level, stable surface.

Remove packaging materials and tape from unit.
Position dehumidifier: Place at least 6 inches from walls for proper airflow.
Install casters: Attach all four wheels to bottom of unit if not pre-installed.
Check filter: Ensure air filter is properly seated in its compartment.
Plug into dedicated 120V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Operation

Power on dehumidifier; follow initial setup steps.

Set desired humidity: Press HUMIDITY button to select 35%-85% RH range.
Select fan speed: Choose HIGH or LOW setting based on needs.
Program timer: Set 24-hour on/off schedule if desired.
Monitor operation: Check display for current room humidity.
Empty tank: When full indicator lights, remove and empty water tank.

CAUTION! Always turn off and unplug before servicing or moving unit.

Specifications

Capacity: 65 pints per day at 80°F/60% RH.
Coverage Area: Up to 1500 square feet.
Power Requirements: 120V, 60Hz, 7.5A.
Water Tank: 2.2-gallon removable bucket.
Noise Level: 52 dB on low setting.
Operating Temperature: 41°F to 95°F.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R-410A.
Certifications: Energy Star, ETL listed.

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Tank full, Filter clean, Timer active, Fan speed.

Humidity Control: Set between 35%-85% RH in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program on/off cycles in 1-hour increments up to 24 hours. Filter Alert: Illuminates when filter needs cleaning (reset after cleaning). Auto-Defrost: Automatically activates in low-temperature conditions.

Continuous Drainage Setup

For continuous operation without emptying tank.

Turn off and unplug dehumidifier.
Remove water tank from unit.
Attach 5/8" ID garden hose to drainage port (not included).
Route hose to floor drain, sink, or sump pump.
Replace tank (unit will not operate without tank in place).
Plug in and turn on - unit will now drain continuously.

Tip: Ensure hose has downward slope for proper drainage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean air filter: Remove and wash with warm, soapy water every 2 weeks.
Clean water tank: Empty and clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check hose: Ensure continuous drainage hose is clear of obstructions.
Off-season storage: Clean thoroughly, empty tank, store in dry location.

CAUTION! Always unplug before cleaning. Never immerse unit in water.

Energy Saving Tips

Maximize efficiency and reduce energy costs.

Set humidity to 50-55% for optimal comfort and efficiency.
Use timer to run during peak humidity hours only.
Keep doors and windows closed while dehumidifier is operating.
Clean filter regularly to maintain airflow and efficiency.
Use continuous drainage to avoid compressor cycling due to full tank.

Regulatory Information

This dehumidifier complies with FCC Part 15 Class B digital device requirements. Manufactured for Danby Products Inc. Energy Star qualified - meets strict energy efficiency guidelines set by the EPA. For support, visit www.danby.com or contact 1-800-263-2629. Keep these instructions for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is properly seated and not full.
Poor moisture removal	Dirty filter/extreme temps	Clean air filter; ensure room temperature is within operating range.
Water leakage	Improper hose connection	Check continuous drainage hose for proper connection and kinks.
Loud operation	Uneven surface/obstruction	Place on level surface; check for objects touching unit.
Ice on coils	Low temperature	Auto-defrost should activate; if persistent, raise room temperature.
Filter light on	Dirty filter	Clean filter and press FILTER RESET button.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com