Danby DDR70B1CP Dehumidifier Manual

The Danby DDR70B1CP is a 70-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, washable air filter, auto-restart, digital controls with LED display, 24-hour timer, full bucket alert, and energy-efficient operation. Suitable for areas up to 4500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water collection bucket, Continuous drain hose connection, Washable air filter, Casters for mobility, Auto-defrost function.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment (30%-90% RH)
Water Bucket	70-pint capacity with full bucket alert and auto-shutoff
Continuous Drain	Option for hose connection for unattended operation
Air Filter	Washable filter for improved air quality
Digital Controls	LED display with touch controls and 24-hour timer
Auto-Restart	Resumes previous settings after power interruption
Auto-Defrost	Prevents coil freezing in low temperatures
Mobility	Four casters for easy room-to-room movement
Energy Efficient	ENERGY STAR certified operation
Quiet Operation	Low noise level for residential use

Installation

Unpack and inspect contents. Place on level surface.

Positioning: Place at least 6 inches from walls for proper airflow.
Bucket installation: Insert empty water bucket securely until it clicks.
Continuous drain option: Attach 5/8" ID hose to drain port (hose not included).
Power connection: Plug into dedicated 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Plug in unit; follow initial setup procedure.

Initial power: Unit will beep and display will light up.
Set humidity level: Press HUMIDITY button to select desired level (45% recommended).
Select fan speed: Choose LOW or HIGH using FAN button.
Set timer (optional): Use TIMER button to program on/off schedule.
Check filter: Ensure filter is clean before first use.

CAUTION! Handle with care when moving; unit contains refrigerant.

Specifications

Capacity: 70 pints per day (at 60% RH, 80°F).
Coverage Area: Up to 4500 sq. ft.
Water Bucket: 70-pint capacity with full indicator.
Humidity Control: 30% to 90% RH adjustable.
Fan Speeds: 2 speeds (High/Low).
Power Requirements: 115V, 60Hz, 7.5A.
Refrigerant: R410A.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 46.3 lbs.
Operating Temperature: 41°F to 95°F.
Noise Level: ≤ 52 dB.

Controls and Settings

Access controls via digital panel. Control Panel: POWER, HUMIDITY, FAN, TIMER, MODE.

Display Indicators: Current humidity, Set humidity, Fan speed, Timer, Bucket full, Filter clean, Defrost mode.

Humidity Setting: Press HUMIDITY to cycle through 30%-90% in 5% increments. Fan Speed: Press FAN to toggle between HIGH and LOW. Timer: Press TIMER to set 1-24 hour on/off delay. Mode Selection: AUTO (automatic humidity control), CONTINUOUS (continuous operation), DRY (maximum dehumidification).

Operation Modes

Three operating modes for different needs.

AUTO Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
CONTINUOUS Mode: Runs continuously regardless of humidity level.
DRY Mode: Maximum dehumidification for very damp conditions.

Tip: Use AUTO mode for energy-efficient operation in living spaces.

Maintenance

Regular maintenance ensures optimal performance.

Empty water bucket: When FULL indicator lights, remove and empty bucket.
Clean air filter: Remove and wash filter every 2 weeks or as needed.
Clean exterior: Wipe with damp cloth when unit is unplugged.
Check drain hose: Ensure continuous drain hose is clear if used.
Off-season storage: Empty completely, clean, and store in dry place.

WARNING! Always unplug unit before performing any maintenance.

Care & Cleaning

Unplug before cleaning. Use mild detergent and damp cloth only.

CAUTION! Do not use abrasive cleaners or solvents. Never immerse unit in water.

Regulatory Information

UL Listed: Meets UL 474 safety standards. ENERGY STAR: Certified for energy efficiency. EPA: Compliant with refrigerant regulations. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power/bucket	Check power connection; ensure bucket is properly inserted.
Low dehumidification	Filter/temperature	Clean air filter; ensure room temperature above 41°F.
Water leakage	Bucket/drain hose	Ensure bucket is seated properly; check drain hose connection.
Loud noise	Leveling/obstruction	Place on level surface; check for foreign objects near fan.
Display not working	Power/controls	Check power source; press RESET button if available.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-263-2629; www.danby.com