Danby Designer DDR601 Dehumidifier Manual

The Danby Designer DDR601 is a 60-pint dehumidifier designed for residential use, featuring electronic controls, automatic defrost, continuous drainage capability, a 24-hour timer, adjustable humidity settings, and a washable air filter. It operates on 115V, 60Hz power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 60-pint water tank, Continuous drain hose connection, Washable air filter, Automatic defrost system, Casters for mobility.

Feature	Description
Electronic Controls	Digital display with touchpad for easy operation
60-Pint Capacity	Removes up to 60 pints of moisture per day (at 80°F, 60% RH)
Continuous Drainage	Option to connect a hose for automatic water removal
Automatic Defrost	Prevents ice buildup on coils in low temperatures
24-Hour Timer	Program start/stop times for energy efficiency
Adjustable Humidistat	Set desired humidity level from 35% to 85%
Washable Air Filter	Captures airborne particles; can be cleaned and reused
Full Tank Alert	Indicator light and automatic shut-off when tank is full
Power Cord Storage	Built-in compartment for neat cord storage
Casters	Four wheels for easy movement between rooms

Installation

Unpack and inspect contents. Place on a level, stable surface.

Positioning: Place unit at least 12 inches away from walls and furniture for proper airflow.
Check Filter: Ensure the washable air filter is properly installed.
Continuous Drainage (Optional): Connect a standard garden hose (not included) to the drain outlet at the back.
Power Connection: Plug into a dedicated 115V, 60Hz grounded outlet.

WARNING! Do not use an extension cord. Ensure the unit is upright for at least 24 hours before first use if it was tilted during transport.

First-Time Setup

Power on the dehumidifier; follow initial setup steps.

Set Humidity Level: Press the HUMIDITY button to select desired level (recommended 45-50%).
Select Fan Speed: Choose between HIGH or LOW fan speed using the FAN button.
Set Timer (Optional): Use the TIMER button to program automatic on/off cycles.
Check Drainage: Ensure water tank is empty and properly seated, or hose is connected securely.

CAUTION! Operate only within specified temperature range (41°F to 95°F). Do not block air intake or exhaust grilles.

Specifications

Model: DDR601 (Designer Series)
Dehumidification Capacity: 60 Pints/Day (at 80°F, 60% RH)
Power Supply: 115V, 60Hz, 6.5A
Water Tank Capacity: 16 Pints (Removable)
Operating Temperature Range: 41°F to 95°F
Air Flow: 165 CFM (High Speed)
Refrigerant: R410A
Noise Level: ≤ 52 dB(A)
Dimensions (HxWxD): 24.2" x 15.4" x 13.4"
Weight: 46.3 lbs

Controls and Settings

Access all functions via the electronic control panel on top of the unit.

Control Panel: POWER, HUMIDITY (Up/Down), FAN (High/Low), TIMER (Set Hours), MODE (Continuous/Target), FILTER ALERT (Reset).

Humidity Control: Set target humidity from 35% to 85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program from 1 to 24 hours for automatic start or stop. Mode: CONTINUOUS runs until turned off or tank is full; TARGET maintains set humidity level. Filter Alert: LED illuminates when air filter needs cleaning (after 250 hours of operation).

Operation

For normal dehumidification in basements, living areas, or storage spaces.

Power On: Press POWER button; unit will start in last used settings.
Set Target Humidity: Use HUMIDITY buttons to select desired level.
Empty Water Tank: When FULL TANK light comes on, power off, remove tank, empty, and replace.
Continuous Drainage: If hose is connected, unit will drain automatically; ensure hose path is downhill.
Use Timer: Set TIMER for automatic operation (e.g., run only during night hours).

Tip: Close windows and doors in the room for best efficiency. Ideal room temperature is above 65°F.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean Air Filter: Remove filter every 2 weeks (or when FILTER light is on), wash with warm water and mild detergent, dry completely before reinstalling.
Clean Exterior: Wipe cabinet with a soft, damp cloth. Do not use abrasive cleaners.
End-of-Season Storage: Empty and dry tank completely. Coil the power cord. Store in a dry, upright position.
Inspect Drain Hose: If using continuous drain, check hose for kinks or blockages monthly.

WARNING! Always unplug the unit before performing any maintenance. Do not attempt to repair refrigerant system.

Care & Cleaning

Unplug before cleaning. Clean only with a soft, dry or slightly damp cloth.

CAUTION! Never immerse unit in water or use harsh chemicals, gasoline, or solvents. Do not spray liquids directly onto the unit.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power / Full tank	Check plug and outlet; ensure tank is empty and properly seated.
Reduced moisture removal	Dirty filter / Low temp	Clean air filter; ensure room temperature is above 41°F.
Water leakage	Loose connections / Hose	Check tank placement and drain hose connection; ensure hose is not kinked.
Loud or unusual noise	Loose parts / Uneven surface	Ensure unit is on level floor; check for foreign objects near fan.
FILTER light is on	Dirty air filter	Clean the washable air filter and press FILTER button to reset alert.
Frost on coils	Low ambient temperature	Automatic defrost should activate; move unit to a warmer area if persistent.

Reset: Unplug for 10 minutes, then plug back in to reset electronic controls.

Service: 1-800-263-2629; www.danby.com