Danby Premiere DDR30B3WP Dehumidifier Manual

The Danby Premiere DDR30B3WP is a 30-pint capacity dehumidifier designed for residential use, featuring an Energy Star certification, electronic controls with digital display, auto-restart function, continuous drain option, washable filter, adjustable humidity control, 24-hour timer, full tank alert with auto-shutoff, and quiet operation. Suitable for rooms up to 1500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel with digital display, 30-pint water tank, washable air filter, continuous drain hose connection, casters for mobility, and remote control.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Remove packaging: Take unit out of box, remove all tape and protective materials.
2. Positioning: Place at least 6-12 inches from walls and furniture for proper airflow.
3. Level surface: Ensure unit is level to prevent water leakage and ensure proper operation.
4. Power connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cords.

WARNING! Do not place in areas with temperatures below 41°F (5°C). Ensure adequate ventilation around the unit.

First-Time Setup

Allow unit to stand upright for 24 hours before first use if transported horizontally.

1. Install filter: Ensure washable filter is properly seated in its compartment.
2. Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
3. Select mode: Choose between Continuous, Auto, or Timer mode based on needs.
4. Check drainage: Ensure water tank is properly inserted or connect drain hose if using continuous drainage.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt or invert during operation.

Specifications

• Model: DDR30B3WP
• Dehumidification Capacity: 30 pints/24 hrs (80°F, 60% RH)
• Coverage Area: Up to 1500 sq. ft.
• Power Supply: 115V, 60Hz, 3.5A
• Water Tank Capacity: 1.6 gallons (6 liters)
• Operating Conditions: 41°F to 95°F (5°C to 35°C)
• Noise Level: ≤ 51 dB
• Dimensions: 15.4" W × 11.4" D × 19.9" H
• Weight: 33 lbs
• Refrigerant: R410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, set point, timer settings, filter alert, full tank alert.

Mode Selection: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TIMER (programmed operation). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Humidity Control: Adjust in 5% increments from 35% to 85%. Timer: Program on/off cycles in 1-hour increments up to 24 hours. Filter Reset: Press after cleaning filter to reset maintenance indicator.

Operating Modes

Three main operating modes for different needs.

1. Auto Mode: Unit automatically turns on/off to maintain set humidity level.
2. Continuous Mode: Runs continuously regardless of humidity level.
3. Timer Mode: Set specific on/off times for energy savings.
4. Fan Only Mode: Circulates air without dehumidifying (available in some models).

Tip: Use Auto mode for optimal energy efficiency in most conditions.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and wash filter every 2-4 weeks with warm water and mild detergent.
2. Empty water tank: Regularly empty collection bucket or ensure continuous drain is functioning.
3. Clean exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
4. Clean coils: Gently vacuum condenser coils every 3-6 months to remove dust.
5. Off-season storage: Clean thoroughly, empty all water, store upright in dry location.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Drainage Options

Two methods for water removal: manual bucket or continuous drain.

Manual Drainage: When tank is full, "FULL" indicator lights and unit shuts off. Remove tank, empty, and replace.

Continuous Drainage: Connect 5/8" ID hose to drain port (hose not included). Ensure hose runs downward without kinks. Unit will drain continuously without needing to empty tank.

CAUTION! Ensure proper hose connection to prevent leaks. Check local codes for drainage disposal.

Energy Saving Tips

• Set humidity to 45-50% for comfort and efficiency.
• Use timer to run during peak humidity hours only.
• Keep doors and windows closed when unit is operating.
• Clean filter regularly to maintain airflow efficiency.
• Use in appropriately sized space (up to 1500 sq. ft.).
• Consider continuous drain to avoid energy used for auto-shutoff/restart cycles.

Regulatory Information

UL Listed. Energy Star certified. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. This product contains refrigerant; follow local regulations for disposal. Made in China.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com