Danby Premiere DDR35E Dehumidifier Manual

The Danby Premiere DDR35E is a high-capacity, energy-efficient dehumidifier designed for residential and light commercial use. It features a 35-pint per day removal capacity (at AHAM conditions), digital humidity readout, auto-defrost, continuous drain option, washable filter, and quiet operation. Suitable for areas up to 1500 sq ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel with humidity display, 2.1-gallon water tank with full indicator, washable air filter, continuous drain hose connection, casters for mobility, and auto-restart function.

Feature	Description
Digital Humidity Display	Shows current room humidity and set point
Auto Defrost	Prevents coil freezing in low temperatures
Continuous Drain Option	For hose connection to floor drain or sink
Washable Air Filter	Captures dust and airborne particles
Full Tank Alert & Auto Shutoff	Stops operation when tank is full
24-Hour Timer	Program on/off cycles
Turbo Mode	Maximum moisture removal speed
Quiet Operation	Low noise design for living spaces
Energy Efficient	ENERGY STAR® certified
Casters & Handles	Easy mobility between rooms

Installation & Placement

Unpack and inspect contents. Place on level, stable floor.

Positioning: Place at least 6 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level for correct operation and water collection.
Drain Options: Use built-in tank or connect drain hose to continuous drain port.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.

WARNING! Do not place in areas below 41°F (5°C). Ensure adequate ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

Install filter: Ensure washable filter is properly seated in front grille.
Set humidity level: Press HUMIDITY SET button to desired RH% (30-80%).
Select mode: Choose between Continuous, Auto, or Turbo mode.
Check drain: Place empty tank or connect drain hose securely.

CAUTION! Handle with care when moving; unit contains refrigerant.

Specifications

Model: DDR35E (Premiere Series)
Moisture Removal: 35 pints per day (at 80°F, 60% RH)
Coverage Area: Up to 1500 square feet
Tank Capacity: 2.1 gallons (8 liters)
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Power Supply: 115V, 60Hz, 4.5A
Refrigerant: R410A
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 19.9" H
Weight: 33 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY SET, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, Set point, Full tank, Filter clean, Defrost, Timer.

Humidity Control: Set between 30-80% RH in 5% increments. Modes: Auto (maintains set point), Continuous (runs constantly), Turbo (maximum dehumidification). Timer: Program 1-24 hours for automatic start/stop. Filter Alert: Illuminates when filter needs cleaning (reset after cleaning).

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs continuously regardless of humidity. Turbo Mode: Fan runs at highest speed for fastest moisture removal.

Select mode with MODE button.
Adjust humidity set point as needed.
Monitor water tank; empty when full or use continuous drain.
Use timer for energy-saving operation.

Tip: For optimal efficiency, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures peak performance and longevity.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank regularly; clean with mild detergent monthly.
Wipe exterior with soft, damp cloth. Do not use abrasive cleaners.
Check drain hose for clogs if using continuous drain.
Inspect grille and coils for dust buildup; vacuum if necessary.

WARNING! Unplug unit before any maintenance. Never immerse in water.

Storage Instructions

For seasonal storage or extended non-use:

Unplug unit and empty water tank completely.
Clean filter and tank; allow all parts to dry thoroughly.
Coil drain hose neatly if attached.
Store in upright position in cool, dry place.
Cover to prevent dust accumulation.

CAUTION! Store in area where temperature remains above freezing.

Safety Information

Important safety precautions for operation and maintenance.

Always plug into grounded 3-prong outlet.
Do not operate with damaged cord or plug.
Keep unit away from heat sources and flammable materials.
Do not block air intake or exhaust grilles.
Do not use in presence of explosive fumes.
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities.

DANGER! Risk of fire or explosion. Do not puncture refrigerant tubing.

Regulatory Information

UL Listed. ENERGY STAR® certified. Complies with FCC Part 15 Class B. Manufactured for Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. This product contains fluorinated greenhouse gases covered by the Kyoto Protocol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power outlet; ensure tank is empty and properly seated.
Reduced moisture removal	Dirty filter/extreme conditions	Clean filter; ensure room temp is between 41-95°F.
Water leakage	Improper placement/damage	Ensure unit is level; check tank for cracks; secure drain hose.
Loud noise/vibration	Uneven surface/loose parts	Place on level floor; check for loose panels or foreign objects.
Display shows "CF"	Filter needs cleaning	Clean filter and press FILTER RESET button.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com