Danby Premiere DDR45A2GP Dehumidifier Manual

The Danby Premiere DDR45A2GP is a 45-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drain capability, auto-restart after power interruption, washable air filter, digital controls with LED display, 24-hour timer, and quiet operation. Ideal for basements, living areas, and other spaces up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water tank with full indicator, Continuous drain hose connection, Washable air filter, Casters for mobility, Handle for transport.

Feature	Description
Digital Control Panel	LED display for humidity level, timer, and settings
45-Pint Capacity	Removes up to 45 pints per day at 80°F/60% RH
Automatic Humidity Control	Set desired humidity level (35%-85%)
Continuous Drain Option	Gravity drain hose connection (hose not included)
Auto-Restart	Resumes previous settings after power outage
24-Hour Timer	Program on/off times
Washable Air Filter	Captures dust and airborne particles
Full Tank Alert & Auto Shut-Off	Stops operation when tank is full
Quiet Operation	Low noise level for residential use
Casters & Handle	Easy mobility between rooms

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room, away from walls/furniture (minimum 12 inches clearance).
Ensure proper airflow: Keep air inlet and outlet grilles unobstructed.
Check environment: Operate in temperatures between 41°F and 95°F.
Position near drain: If using continuous drain, place near floor drain or sink.
Plug into dedicated 115V AC outlet.

WARNING! Do not use in confined spaces or near heat sources. Ensure unit is upright before operating.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Install air filter: Ensure washable filter is properly seated.
Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
Select fan speed: Choose HIGH or LOW fan setting.
Set timer (optional): Program 24-hour on/off schedule.
Check drain options: Install drain hose for continuous use or use water tank.

CAUTION! Handle with care when moving; use two people if necessary.

Specifications

Model: DDR45A2GP
Capacity: 45 pints per day (at 80°F/60% RH)
Coverage Area: Up to 3000 sq. ft.
Operating Temperature: 41°F to 95°F
Humidity Control Range: 35% to 85% RH
Water Tank Capacity: 1.8 gallons
Power Supply: 115V AC, 60Hz
Power Consumption: 4.5 Amps
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
Weight: 41 lbs

Controls and Settings

Access controls via digital panel. Front Panel: POWER, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Full tank, Filter clean, Defrost.

Humidity Control: Set between 35%-85% RH. Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: 24-hour programmable on/off. Filter Reset: Press after cleaning air filter. Auto Defrost: Automatically activates when coil frosts.

Operation Modes

Normal Mode: Set desired humidity; unit runs until level is reached. Continuous Mode: Runs continuously regardless of humidity level. Timer Mode: Program specific operating times.

Press POWER to turn on.
Set humidity using HUMIDITY buttons.
Select fan speed (HIGH/LOW).
For continuous operation, set humidity to lowest setting.
Monitor water tank; empty when full indicator lights.

Tip: Close windows and doors for optimal performance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean air filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank regularly: Lift straight up to remove; pour out water.
Clean exterior: Unplug unit, wipe with damp cloth.
Clean water tank monthly: Use mild detergent, rinse thoroughly.
Check drain hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Always unplug before cleaning. Do not use harsh chemicals.

Draining Options

Two methods: Water tank or continuous drain.

Water Tank: Unit stops when tank is full (indicator lights). Remove tank by lifting straight up, pour out water, replace securely.

Continuous Drain: Connect 5/8" ID hose to drain port (hose not included). Ensure hose runs downward to floor drain or sink. Gravity drain only - no pump included.

CAUTION! Do not tilt unit with full water tank. Ensure drain hose has no kinks.

Energy Saving Tips

Set humidity to 45-50% for optimal energy efficiency.
Use timer to run during most humid times of day.
Keep doors and windows closed while operating.
Clean air filter regularly to maintain airflow.
Use continuous drain to avoid frequent tank emptying.
Place unit in center of room for best air circulation.

Regulatory Information

UL Listed: Meets safety standards for household use. Energy Star: Meets energy efficiency guidelines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power cord; ensure outlet works; empty water tank.
Poor dehumidification	Dirty filter/extreme temps	Clean air filter; ensure room temp between 41°F-95°F.
Water leaking	Improper tank placement	Ensure tank is properly seated; check drain hose connection.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects near fan.
Frost on coils	Low temperature	Auto defrost will activate; move to warmer area if persistent.
Display not working	Power interruption	Unplug for 5 minutes, then restart; check power source.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-263-2629; www.danby.com