Danby Premiere DDR45E Dehumidifier Manual

The Danby Premiere DDR45E is a high-capacity 45-pint dehumidifier designed for residential use. It features electronic controls, a digital display, automatic humidity sensing, continuous drainage capability, a washable air filter, a full-bucket alert with auto-shutoff, a 24-hour timer, and energy-efficient operation. Ideal for basements, living areas, and other spaces up to 3000 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Digital display, Water collection bucket, Washable air filter, Continuous drainage port, Casters for mobility.

Installation

Unpack and inspect contents. Place on a level, stable floor.

1. Positioning: Place unit at least 6-12 inches from walls and furniture for proper airflow.
2. Check Filter: Ensure the washable air filter is installed correctly.
3. Bucket Installation: Insert the empty water collection bucket securely until it clicks.
4. Continuous Drainage (Optional): Attach a standard garden hose (not included) to the drain port at the back.
5. Power Connection: Plug into a dedicated 115V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Operate only in temperatures between 41°F (5°C) and 95°F (35°C). Ensure the unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug in the unit. The control panel will illuminate.

1. Set Humidity Level: Press the "Humidity" button to set your desired level (recommended 45-50% for general comfort).
2. Select Fan Speed: Choose between High (faster dehumidification) or Low (quieter operation).
3. Timer Setup (Optional): Use the Timer buttons to program automatic start or stop times.
4. Begin Operation: Press the "Power" button. The unit will begin sensing room humidity and operate as needed.

CAUTION! Do not block air intake or exhaust grilles. Ensure the bucket is correctly seated to activate the auto-shutoff switch.

Specifications

• Model: DDR45E (Premiere Series)
• Capacity: 45 Pints per Day (AHAM at 80°F/60% RH)
• Recommended Room Size: Up to 3000 sq ft
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Power Supply: 115V / 60Hz
• Amps: 4.5 A
• Water Bucket Capacity: 1.6 Gallons (6 Liters)
• Air Filter: Washable, Anti-Microbial
• Dimensions (HxWxD): Approx. 24" x 15" x 12"
• Weight: Approx. 42 lbs
• Refrigerant: R410A

Controls and Settings

Access all functions via the electronic control panel on top of the unit.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (High/Low), TIMER (Set/Cancel), FILTER ALERT (Reset), DEFROST (Auto).

Display Icons: Current Humidity %, Set Humidity %, Fan Speed, Timer, Full Bucket, Filter Alert, Defrost.

Humidity Control: Set between 35% and 85% in 5% increments. The unit cycles on/off automatically to maintain set point.

Timer: Program to turn the unit ON or OFF after 1-24 hours.

Filter Reset: Press and hold the "Filter" button for 3 seconds after cleaning the filter to reset the alert light.

Operation Modes

Normal Mode: Set desired humidity and fan speed. Unit runs until humidity is reached, then enters fan-only mode.

1. Continuous Mode: Set humidity to "CONT" (Continuous). Unit runs constantly regardless of room humidity.
2. Laundry Mode: For drying clothes indoors. Use Continuous mode with High fan speed.
3. Auto-Defrost: In low temperatures, the compressor may cycle off while the fan runs to melt frost on coils. This is automatic.
4. Timer Operation: Set the timer for delayed start (e.g., before you get home) or auto shutoff.

Tip: For maximum efficiency, keep doors and windows closed in the room being dehumidified.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Emptying the Bucket: When the "Full" light illuminates, power off, pull out the bucket, and empty it. Replace securely.
2. Cleaning the Air Filter: Clean the filter every 2-4 weeks or as needed. Rinse under warm water, let dry completely, and reinstall.
3. Cleaning the Exterior: Wipe the cabinet with a soft, damp cloth. Do not use harsh chemicals.
4. End-of-Season Storage: Empty and dry the bucket. Clean the filter. Coil the power cord. Store upright in a dry place.
5. Continuous Drainage: Ensure the hose is not kinked and slopes downward away from the unit.

WARNING! Always unplug the unit before performing any maintenance. Do not tilt or turn the unit upside down.

Care & Cleaning

Unplug before cleaning. Use only a soft, damp cloth. Do not immerse in water or use abrasive cleaners.

CAUTION! Never use gasoline, thinner, or other chemicals for cleaning. Do not spray water directly on the unit.

Regulatory Information

This appliance meets applicable FCC standards. For indoor, household use only. Copyright © Danby Products Inc. All rights reserved. This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. Refrigerant: R410A, GWP: 2088. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Reset: Unplug the unit for 5 minutes to reset the electronic control system.

Service: 1-800-263-2629; www.danby.com