Danby Premiere DDR5009REE Dehumidifier Manual

The Danby Premiere DDR5009REE is a high-capacity dehumidifier designed for large rooms and basements, featuring a 50-pint per day removal capacity, electronic controls with digital display, auto-restart, continuous drainage option, washable air filter, 24-hour timer, and multiple fan speeds. It operates on standard 115V household current. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel with digital display, removable water bucket with full-bucket indicator, continuous drainage port, washable air filter, casters for mobility, and adjustable humidistat.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Clear area: Ensure at least 12-18 inches of clearance on all sides for proper airflow.
2. Check level: Unit must be level for bucket to seat properly and for efficient operation.
3. Power connection: Plug directly into a grounded 115V outlet. Do not use extension cords.
4. For continuous drainage: Attach standard garden hose (not included) to drainage port.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Set humidity level: Press HUMIDITY button, then UP/DOWN arrows to set desired RH% (45-50% recommended).
2. Select fan speed: Press FAN button to choose High (faster dehumidification) or Low (quieter operation).
3. Check filter: Ensure washable air filter is clean and properly installed.
4. Test operation: Unit will start when room humidity exceeds set point. Bucket should begin collecting water.

CAUTION! Handle water bucket with care when full; it can be heavy. Empty promptly when full indicator lights.

Specifications

• Model: DDR5009REE (Premiere Series)
• Dehumidification: 50 pints per day (AHAM at 80°F/60% RH)
• Bucket Capacity: 2.1 gallons (removable)
• Coverage Area: Up to 1500 sq. ft. in moderate conditions
• Operating Conditions: 41°F to 95°F (5°C to 35°C)
• Fan Speeds: 2 (High/Low)
• Power Supply: 115V, 60Hz, 5.5A
• Refrigerant: R410A (environmentally friendly)
• Dimensions (HxWxD): 23.4" x 15.0" x 11.2"
• Weight: 41.9 lbs
• Noise Level: ≤ 52 dB on High setting

Controls and Settings

Access all functions via electronic control panel. Display shows current humidity, set point, timer, and alerts.

Control Panel: POWER, HUMIDITY (set point), FAN (speed), TIMER (24-hour), FILTER (reset indicator), BUCKET (full indicator).

Humidity Control: Adjustable from 35% to 85% RH in 5% increments. Fan Control: High for maximum moisture removal, Low for quiet nighttime operation. Timer: Program unit to turn ON or OFF after 1-24 hours. Filter Reset: Press and hold FILTER button for 3 seconds after cleaning filter. Auto Defrost: Automatically activates when coil temperature drops; fan stops temporarily.

Operation Modes

Normal Mode: Unit runs until set humidity is reached, then cycles on/off automatically. Continuous Mode: Press and hold HUMIDITY button for 3 seconds; runs continuously regardless of humidity (for very damp spaces). Timer Mode: Set unit to start/stop at specific times.

1. For normal use: Set desired humidity (45-50% for comfort).
2. For drying laundry room/basement: Use Continuous mode or set to 35%.
3. For energy savings: Set to 55-60% when away, use timer to run during peak humidity hours.

Tip: Close windows and doors in the room being dehumidified for best performance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty bucket: When full indicator lights, remove bucket, empty, and replace securely.
2. Clean air filter: Every 2-4 weeks, remove filter, wash with warm soapy water, rinse, dry completely, and reinstall.
3. Reset filter indicator: After cleaning, press and hold FILTER button for 3 seconds.
4. Clean exterior: Unplug unit, wipe with damp cloth. Do not use harsh chemicals.
5. End-of-season storage: Empty bucket, clean filter, let unit run in fan-only mode for 1 hour to dry internals, coil cord, and store upright in dry place.

WARNING! Always unplug unit before cleaning or maintenance. Never immerse in water.

Drainage Options

Bucket Method: Standard operation; empty when full indicator lights. Continuous Drainage: For unattended operation.

1. Locate drainage port on back of unit.
2. Remove port cover.
3. Attach standard 5/8" garden hose (not included). Ensure hose runs downward without kinks.
4. Place hose end into floor drain or suitable outlet.
5. Unit will drain continuously; bucket does not need to be emptied.

Note: For gravity drainage, unit must be level or slightly tilted toward hose. Pump not included.

Energy Efficiency Tips

Set humidity to 45-50% for comfort; higher settings save energy. Use timer to run during most humid parts of day (often overnight). Keep doors/windows closed. Ensure filter is clean for unrestricted airflow. Place unit away from heat sources and in center of problem area for even dehumidification.

Regulatory Information

This dehumidifier complies with relevant U.S. safety and performance standards. EPA Energy Star certified for energy efficiency. Refrigerant R410A is ozone-safe. For your safety and to ensure compliance, no user-serviceable parts inside. Refer all servicing to qualified personnel. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com