Danby Premiere DDR50A1GP Dehumidifier Manual

The Danby Premiere DDR50A1GP is a 50-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, digital controls with LED display, washable air filter, auto restart, and turbo mode for faster moisture removal. Suitable for areas up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Continuous Drainage 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, LED display, Washable air filter, Water tank with full indicator, Continuous drainage port, Casters for mobility, Handle for transport.

FeatureDescription
Capacity50 pints per day (at 80°F, 60% RH)
Digital ControlsLED display with humidity readout and timer
Auto Humidity ControlSet desired humidity level (35%-85%)
Continuous DrainageGarden hose connection for automatic water removal
Washable Air FilterRemovable and reusable filter
Auto RestartResumes previous settings after power interruption
Turbo ModeIncreases fan speed for faster dehumidification
Full Tank AlertLED indicator and auto shut-off when tank is full
24-Hour TimerProgram on/off cycles
MobilityBuilt-in handle and casters for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Remove all packaging materials and tape.
  2. Position unit: Ensure at least 12 inches clearance from walls and furniture for proper airflow.
  3. Check filter: Ensure air filter is properly installed.
  4. Power connection: Plug into dedicated 115V AC outlet. Do not use extension cord.
  5. For continuous drainage: Connect garden hose to drainage port (optional).

WARNING! Do not operate in temperatures below 41°F (5°C). Keep unit upright during transport and operation.

First-Time Setup

Plug in unit; follow initial setup steps.

  1. Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
  2. Select mode: Choose between Normal, Turbo, or Continuous mode.
  3. Set timer (optional): Use TIMER button to program operation schedule.
  4. Check water tank: Ensure empty and properly seated.
  5. Monitor operation: LED display shows current room humidity and settings.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, MODE selection, FAN speed, TIMER, FILTER indicator, TANK FULL indicator.

Display: Shows current humidity, set humidity, timer status, mode icons.

Humidity Control: Adjust between 35%-85% in 5% increments. Modes: Normal (standard operation), Turbo (high speed), Continuous (runs until tank full). Fan Speed: Adjustable in Normal mode. Timer: Set 1-24 hours for automatic on/off. Filter Alert: LED indicates when filter needs cleaning.

Operating Modes

Normal Mode: Standard dehumidification with adjustable fan speed. Turbo Mode: Maximum moisture removal for damp conditions. Continuous Mode: Runs continuously until tank is full (ignores humidity setting).

  1. Press POWER to turn unit on.
  2. Select mode using MODE button.
  3. Adjust humidity setting as needed.
  4. Monitor water level; empty tank when FULL indicator lights.
  5. Use timer for energy-saving operation.

Tip: For maximum efficiency, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean air filter: Remove and wash with warm water every 2 weeks or as needed. Dry completely before reinstalling.
  2. Empty water tank: When FULL indicator lights, turn off unit, remove tank, empty, and replace.
  3. Clean exterior: Wipe with damp cloth. Do not use harsh chemicals.
  4. Clean water tank: Periodically wash with mild detergent to prevent mold/mildew.
  5. End-of-season storage: Empty tank, clean unit, coil dry, store upright in dry location.

WARNING! Always unplug unit before cleaning or maintenance.

Continuous Drainage

For automatic water removal without emptying tank.

  1. Locate drainage port on back of unit.
  2. Remove drainage port cover.
  3. Connect standard garden hose (not included).
  4. Route hose to floor drain, sink, or outdoors.
  5. Ensure hose has downward slope without kinks.
  6. Unit will automatically drain when in operation.

Note: When using continuous drainage, tank full indicator will not activate.

Safety Features

Auto Shut-off: Turns off when tank is full. Auto Defrost: Prevents coil freezing in low temperatures. Tip-over Protection: Shuts off if unit is knocked over. Overload Protection: Protects compressor from electrical issues. Child Lock: Prevents accidental setting changes.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R410A, an environmentally friendly refrigerant. FCC Compliance: Class B digital device. For support, visit www.danby.com or contact 1-800-263-2629. 2-year limited warranty on parts and labor.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not turning onPower issueCheck power cord connection; ensure outlet works; check circuit breaker.
Not removing moistureSettings/temperatureCheck humidity setting; ensure room temperature above 41°F; clean filter.
Water leakingTank/drainageEnsure tank properly seated; check drainage hose connection; level unit.
Loud noisePlacement/filterEnsure unit level; check for obstructions; clean air filter.
Frost on coilsLow temperatureAuto defrost should activate; move to warmer area if below 41°F.
Display not workingPower/controlsCheck power supply; press reset button (if available); contact service.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com

Danby Premiere DDR50A1GP Dehumidifier Manual © - All Rights Reserved 2025