Danby Premiere DDR60A1GP Dehumidifier Manual

The Danby Premiere DDR60A1GP is a 60-pint capacity dehumidifier designed for residential use, featuring electronic controls, a digital display, 24-hour timer, continuous drain option, auto-defrost, washable filter, and adjustable humidity settings. It operates on 115V/60Hz power and is ideal for medium to large rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, 60-pint water tank, Continuous drain hose connection, Washable air filter, Auto-restart function, Auto-defrost system.

Feature	Description
Capacity	60 pints per day (at 80°F, 60% RH)
Control Panel	Electronic touch controls with LED display
Water Tank	Full tank indicator and auto shut-off
Continuous Drain	Hose connection for continuous operation
Timer	24-hour programmable timer
Humidity Control	Adjustable from 35% to 80% relative humidity
Filter	Washable air filter for easy maintenance
Auto-Defrost	Automatic operation in low temperatures
Power Cord	6-foot power cord with storage wrap
Wheels & Handles	Built-in for easy mobility

Installation

Unpack and inspect contents. Place on level surface away from walls and furniture.

Positioning: Place unit on level floor with at least 12 inches clearance on all sides.
Water Tank Installation: Ensure tank is properly seated and locked in place.
Continuous Drain Option: Connect 5/8" ID hose to drain outlet (hose not included).
Power Connection: Plug into grounded 115V outlet. Do not use extension cord.

WARNING! Ensure unit is upright for at least 24 hours before first use if transported on its side. Keep away from heat sources and direct sunlight.

First-Time Setup

Power on dehumidifier; configure initial settings.

Initial Power: Plug in unit. Display will show current room humidity.
Set Desired Humidity: Press HUMIDITY button to set target (40-50% recommended).
Timer Setup: Press TIMER button to program on/off times if needed.
Mode Selection: Choose between Continuous, Auto, or Dry modes.

CAUTION! Do not operate in temperatures below 41°F (5°C). Ensure water tank is empty before first use.

Specifications

Model: DDR60A1GP
Capacity: 60 pints per day (at 80°F, 60% RH)
Coverage Area: Up to 3000 sq. ft.
Power Supply: 115V / 60Hz
Amperage: 5.5A
Water Tank Capacity: 2.2 gallons (8.3 liters)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410a

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Full tank, Filter clean, Defrost mode.

Humidity Settings: Adjustable from 35% to 80% in 5% increments. Fan Speed: High or Low settings. Modes: Continuous (runs constantly), Auto (maintains set humidity), Dry (for laundry rooms). Timer: Program on/off times in 1-hour increments up to 24 hours. Filter Reset: Press after cleaning filter to reset indicator.

Operation Modes

Three operating modes for different needs.

Auto Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
Continuous Mode: Runs continuously regardless of humidity level.
Dry Mode: Optimized for drying laundry or very damp areas.

Tip: Use Auto mode for energy efficiency. Empty water tank regularly or use continuous drain.

Maintenance

Regular maintenance ensures optimal performance.

Water Tank: Empty when full tank indicator lights. Clean monthly with mild detergent.
Air Filter: Clean every 2 weeks or when FILTER light illuminates.
Exterior Cleaning: Wipe with damp cloth. Never use harsh chemicals.
End of Season: Drain completely, clean tank and filter, store upright in dry place.

WARNING! Always unplug unit before cleaning. Do not immerse in water.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only.

CAUTION! Do not use gasoline, thinners, or abrasive cleaners. Keep electrical components dry.

Regulatory Information

UL Listed. CSA Certified. Meets DOE energy efficiency standards. This product contains refrigerant that must be disposed of properly by certified technicians. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is empty and properly seated.
Reduced dehumidification	Dirty filter/extreme temps	Clean air filter; ensure room temperature is within operating range.
Water leakage	Tank not seated/drain hose	Ensure tank is properly locked; check drain hose connection.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects near fan.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com