Danby Premiere DDR60A3GP Dehumidifier Manual

The Danby Premiere DDR60A3GP is a high-capacity 60-pint dehumidifier designed for residential use in spaces up to 3000 sq. ft. It features an Energy Star rating, digital humidity readout, auto-restart, continuous drain option, washable filter, 24-hour timer, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 60-pint water tank, washable air filter, continuous drain port, casters for mobility, and built-in handle.

Feature	Description
Digital Humidity Display	Shows current room humidity and set point
60-Pint Capacity	Removes up to 60 pints per day (at 80°F, 60% RH)
Energy Star Certified	Energy efficient operation
Auto Restart	Resumes previous settings after power interruption
Continuous Drain Option	Garden hose connection for continuous drainage
Washable Filter	Reusable air filter for easy maintenance
24-Hour Timer	Program on/off times for automated operation
Full Tank Alert	Indicator light and auto shut-off when tank is full
Quiet Operation	Designed for low noise in living spaces
Casters & Handle	Easy mobility between rooms

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit on a flat surface with at least 12 inches clearance on all sides for proper airflow.
Check filter: Ensure washable filter is properly installed.
Power connection: Plug into a dedicated 115V AC, 60Hz outlet. Do not use extension cords.
Drain setup: Place empty water bucket under drain spout or connect garden hose for continuous drainage.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set desired humidity: Press HUMIDITY SET button to select between 35% and 85% relative humidity.
Select fan speed: Choose between HIGH and LOW fan settings.
Set timer (optional): Use TIMER button to program automatic start/stop times.
Monitor operation: Check digital display for current room humidity and operation status.

CAUTION! Ensure the water bucket is properly seated before operation to prevent leaks.

Specifications

Model: DDR60A3GP
Capacity: 60 pints per day (at 80°F, 60% RH)
Coverage Area: Up to 3000 sq. ft.
Power Supply: 115V AC, 60Hz
Amperage: 5.5A
Water Tank Capacity: 2.0 gallons (7.6 liters)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 24.0" x 15.0" x 11.2"
Weight: 41.9 lbs
Refrigerant: R410A

Controls and Settings

Access all functions via digital control panel. Front Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Control Functions: POWER turns unit on/off. HUMIDITY SET adjusts target humidity (35%-85%). FAN SPEED toggles between HIGH and LOW. TIMER programs 24-hour on/off schedule. FILTER RESET resets filter maintenance indicator.

Display Indicators: Current humidity, set point, fan speed, timer status, filter alert, full tank alert. Auto Defrost: Automatically activates in low temperatures to prevent coil freezing.

Connecting Drain Hose

For continuous operation without emptying bucket.

Turn off and unplug unit.
Remove drain cap from back of unit.
Connect standard garden hose (¾" diameter) to drain port.
Route hose to floor drain, sink, or outdoors ensuring downward slope.
Plug in and turn on unit; water will drain continuously.

Tip: Ensure hose is not kinked or bent to allow proper water flow.

Operation Modes

Multiple operating modes for different needs.

Normal Mode: Set desired humidity; unit runs until target is reached.
Continuous Mode: Set humidity to lowest setting (35%) for maximum moisture removal.
Timer Mode: Program unit to turn on/off at specific times for energy savings.
Auto Restart: After power outage, unit resumes previous settings automatically.
Auto Defrost: Automatically cycles to melt frost on coils in cold conditions.

WARNING! Do not operate in standing water or extremely dusty environments.

Maintenance

Regular maintenance ensures optimal performance.

Filter Cleaning: Clean washable filter every 2-4 weeks or when FILTER light illuminates. Rinse under warm water, let dry completely before reinstalling. Press FILTER RESET button.

Tank Emptying: Empty water bucket when FULL light illuminates or before it overflows. Always carry bucket with both hands.

Exterior Cleaning: Wipe cabinet with soft, damp cloth. Never use harsh chemicals or abrasives.

Care & Cleaning

Unplug before cleaning. Clean air filter regularly. Empty and clean water bucket monthly with mild detergent.

CAUTION! Do not immerse unit in water. Never use gasoline, thinners, or solvents for cleaning.

Regulatory Information

This product complies with FCC Part 15 regulations. Energy Star qualified. CSA certified. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629. Properly dispose of unit according to local electronic waste regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power outlet; ensure bucket is empty and properly seated; reset circuit breaker.
Poor dehumidification	Dirty filter/room temp	Clean air filter; ensure room temperature is above 41°F; check for closed doors/windows.
Water leakage	Improper bucket placement	Ensure bucket is fully inserted; check drain hose connections; place on level surface.
Loud noise	Loose parts/obstruction	Check for loose panels; ensure unit is level; remove objects near air intake/exhaust.
FILTER light on	Dirty filter	Clean washable filter; press FILTER RESET button.
Ice on coils	Low temperature	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com