Danby Premiere DDR657EE Dehumidifier Manual

The Danby Premiere DDR657EE is a high-capacity, energy-efficient dehumidifier designed for residential use. It features a 65-pint per day removal capacity (at 80°F/60% RH), electronic controls with digital display, auto-restart, continuous drain option, washable filter, adjustable humidistat, 24-hour timer, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, Water tank with full indicator, Washable air filter, Continuous drain hose connection, Casters for mobility, Handle for transport.

Feature	Description
Capacity	65 pints per day (at 80°F/60% RH)
Electronic Controls	Digital display with touch buttons
Auto Restart	Resumes previous settings after power interruption
Continuous Drain	Option for hose connection (hose not included)
Adjustable Humidistat	Set desired humidity level (35% - 85%)
24-Hour Timer	Program on/off cycles
Full Tank Alert	Indicator light and auto shut-off
Washable Filter	Removable and reusable air filter
Quiet Operation	Low noise design for residential use
Mobility	Four casters and carrying handle

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to prevent water leakage.
Drain Options: Use water tank or connect hose to continuous drain port.
Power Connection: Plug into dedicated 115V AC outlet; avoid extension cords.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Ensure proper clearance for air intake and exhaust.

First-Time Setup

Plug in unit; allow to stand upright for 24 hours if transported horizontally.

Install Filter: Ensure washable filter is properly seated.
Select Mode: Press POWER button; unit defaults to AUTO mode.
Set Humidity: Use HUMIDITY buttons to set desired level (recommended 45-50%).
Timer Setup: Use TIMER button to program on/off cycles if needed.
Drain Setup: Place tank or connect hose to continuous drain port.

CAUTION! Handle with care; unit is heavy. Use two people for moving.

Specifications

Model: DDR657EE
Capacity: 65 pints/day (80°F/60% RH)
Power Supply: 115V, 60Hz
Amperage: 5.5A
Refrigerant: R410A
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Water Tank Capacity: 13 pints (with full indicator)
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 23.6" H
Weight: 41.9 lbs
Certifications: ETL Listed, Energy Star Certified

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY (+/-), FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Full tank, Filter alert, Mode icons.

Modes: AUTO (default), CONTINUOUS (runs constantly), DRY CLOTHES (high fan speed). Humidity Setting: Adjustable from 35% to 85% in 5% increments. Fan Speed: HIGH, LOW, AUTO (adjusts based on humidity). Timer: Programmable from 1 to 24 hours for on/off cycles. Filter Reset: Press after cleaning filter to reset indicator.

Operating Modes

Three main operating modes for different needs.

AUTO Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
CONTINUOUS Mode: Runs continuously regardless of humidity level.
DRY CLOTHES Mode: High fan speed for faster drying in laundry areas.

Tip: Use AUTO mode for energy efficiency. Empty water tank promptly when full indicator lights.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Water Tank: Empty regularly; clean monthly with mild detergent.
Air Filter: Clean every 2 weeks; wash with warm water, dry completely.
Exterior: Wipe with soft, damp cloth; do not use harsh chemicals.
Coils: Vacuum dust from coils every 3 months.
Drain Hose: Check for clogs if using continuous drain.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage Instructions

Proper storage prevents damage during non-use periods.

Clean unit thoroughly following maintenance instructions.
Empty and dry water tank completely.
Coil drain: Run in CONTINUOUS mode for 24 hours in warm room to dry coils.
Store upright in dry, covered area above 41°F (5°C).
Cover unit to prevent dust accumulation.

CAUTION! Do not store unit on its side or in freezing temperatures.

Safety Information

Important safety precautions for proper use.

Plug into grounded 3-prong outlet only.
Do not operate with damaged cord or plug.
Keep unit away from water sources and high humidity areas.
Do not block air intake or exhaust grilles.
Do not use in confined spaces without ventilation.
Disconnect power before servicing or moving.
Keep children and pets away from unit.
Do not use extension cords or power strips.

Regulatory Information

ETL Listed: Meets safety standards for the United States and Canada. Energy Star Certified: Meets energy efficiency guidelines. FCC Compliance: Class B digital device; complies with interference limits. For support, visit www.danby.com or contact 1-800-263-2629. This product contains R410A refrigerant. Dispose of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Low temperature	Ensure room temperature above 41°F (5°C).
Water leaking	Unit not level	Place on level surface; check tank placement.
Loud noise	Loose parts	Check for loose screws; ensure unit is on solid surface.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.
Ice on coils	Low temperature	Turn off; let ice melt; raise room temperature.
Display not working	Power issue	Unplug for 5 minutes; plug back in.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com