Danby Premiere DDR7009REE Dehumidifier Manual

The Danby Premiere DDR7009REE is a 70-pint capacity dehumidifier designed for residential use. It features electronic controls with a digital display, adjustable humidity settings from 35% to 85%, continuous drainage option, auto-defrost function for low-temperature operation, a washable air filter, a full bucket alert with auto-shutoff, and a 24-hour timer. Suitable for areas up to 4500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, Removable water bucket, Washable air filter, Continuous drain port, Casters for mobility.

Feature	Description
Capacity	70 pints per day (at 80°F, 60% RH)
Control Panel	Electronic with LED display and touch buttons
Humidity Control	Adjustable from 35% to 85% relative humidity
Auto-Defrost	Automatic operation in low temperatures (down to 41°F)
Continuous Drain	Garden hose connection for unattended operation
Air Filter	Washable mesh filter for improved air quality
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
Timer	24-hour programmable on/off timer
Mobility	Four swivel casters for easy movement
Power	115V, 60Hz, 7.5A

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable air filter is properly installed.
Bucket installation: Insert empty water bucket securely until it clicks.
Power connection: Plug into a dedicated 115V, 60Hz outlet. Do not use extension cords.

WARNING! Ensure unit is upright for at least 24 hours before first use if transported on its side. Keep away from heat sources and water splashes.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button, then use UP/DOWN arrows to set desired RH (35%-85%).
Select mode: Press MODE to choose between Continuous, Auto, or Timer operation.
Set timer (optional): Press TIMER, set hours for ON or OFF delay.
Start operation: Press POWER to begin dehumidification.

CAUTION! Do not block air intake or exhaust grilles. Ensure room temperature is above 41°F for optimal performance.

Specifications

Model: DDR7009REE
Dehumidification Capacity: 70 pints/day (at 80°F, 60% RH)
Coverage Area: Up to 4500 sq. ft.
Operating Temperature: 41°F to 95°F
Water Bucket Capacity: 16 pints
Air Flow: 265 CFM
Noise Level: 52 dB
Power Supply: 115V AC, 60Hz, 7.5A
Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
Weight: 46.3 lbs
Refrigerant: R-410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, UP/DOWN arrows, FILTER indicator, FULL BUCKET indicator.

Display: Shows current humidity, set humidity, timer status, filter alert, and bucket full alert.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TIMER (programmed operation). Humidity Setting: Adjustable in 5% increments from 35% to 85%. Timer: Programmable in 1-hour increments up to 24 hours. Alerts: FILTER light indicates when filter needs cleaning; BUCKET light indicates full bucket.

Connecting Drainage

Continuous drain option for unattended operation.

Turn off and unplug unit.
Remove bucket and drain plug from back of unit.
Attach standard garden hose (¾" inner diameter) to drain port.
Route hose to floor drain or suitable drainage area (downward slope required).
Replace bucket (unit will not operate without bucket installed).
Plug in and restart unit.

Tip: Ensure hose is not kinked and has consistent downward slope for proper drainage.

Operation Modes

Three operating modes available.

Continuous Mode: Runs constantly regardless of humidity level. Press MODE until "CONT" appears.
Auto Mode: Maintains set humidity level. Unit cycles on/off automatically. Press MODE until "AUTO" appears.
Timer Mode: Set delayed start or stop. Press TIMER, use arrows to set hours (1-24), then press TIMER again to confirm.
Auto-Defrost: Automatically activates when coil temperature drops below 41°F. Display shows "DEF" during cycle.
Bucket Full Protection: Unit automatically shuts off when bucket is full. "FULL" indicator lights. Empty bucket to resume.

WARNING! Do not operate without bucket or with bucket improperly installed. Do not move unit while in operation.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean air filter every 2 weeks or when FILTER indicator lights.
Empty water bucket regularly or use continuous drainage.
Clean exterior with soft, damp cloth. Do not use abrasive cleaners.
Store unit upright in dry location when not in use for extended periods.

Care & Cleaning

Unplug unit before any cleaning or maintenance.

Air Filter: Remove, wash with mild detergent and warm water, rinse thoroughly, air dry completely before reinstalling.
Water Bucket: Empty and clean with mild detergent monthly. Rinse thoroughly.
Exterior: Wipe with soft, damp cloth. Do not use chemicals or abrasives.
Coils and internals: Do not attempt to clean. Contact authorized service for internal cleaning.

CAUTION! Never immerse unit in water. Ensure filter is completely dry before reinstalling.

Regulatory Information

UL Listed. Complies with FCC Part 15 Class B. This product contains refrigerant R-410A. Disposal must comply with local regulations. For service or support, contact Danby Customer Service at 1-800-263-2629 or visit www.danby.com. Two-year limited warranty on parts and labor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	No power/bucket not installed	Check power outlet; ensure bucket is properly installed and empty.
Reduced moisture removal	Dirty filter/extreme conditions	Clean air filter; ensure room temp is 41°F-95°F; check for closed doors/windows.
Unit cycles on/off frequently	Set humidity too low/room size	Increase humidity setting; ensure unit is sized for room.
Water leakage	Improper hose connection/bucket full	Check drain hose for kinks; ensure bucket is empty and properly seated.
Unusual noise	Loose parts/foreign objects	Ensure unit is level; check for objects near fan; contact service if noise persists.
Display shows "DEF"	Low temperature operation	Normal operation in cold conditions; unit will resume when coil defrosts.

Reset: Unplug unit for 5 minutes, then restart. If problem persists, contact service.

Service: 1-800-263-2629; www.danby.com