Danby Premiere DDR70A2GP Dehumidifier Manual

The Danby Premiere DDR70A2GP is a high-capacity 70-pint dehumidifier designed for residential use in areas up to 4500 sq. ft. It features electronic controls with a digital display, 24-hour timer, continuous drain option, auto-defrost, washable filter, and multiple fan speeds. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel with digital display, removable water bucket with full-bucket alert, continuous drain hose connection, washable air filter, caster wheels for mobility, and auto-restart function.

Feature	Description
Dehumidification Capacity	70 pints per day (at 80°F, 60% RH)
Digital Display	Shows humidity level, timer, and settings
24-Hour Timer	Program on/off cycles
Continuous Drain Option	Gravity drain hose connection
Auto-Defrost	Prevents coil freezing in low temperatures
Washable Filter	Removable and reusable air filter
Fan Speeds	High, Medium, Low, and Auto settings
Bucket Full Indicator	LED light and audible alert
Auto-Restart	Resumes previous settings after power interruption
Caster Wheels	Easy mobility between rooms

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Bucket Installation: Ensure water bucket is properly seated and locked in place.
Continuous Drain Setup: Attach 5/8" ID hose to drain port and route to floor drain or sink.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.

WARNING! Ensure unit is upright for at least 2 hours before first use if tilted during transport.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Set Desired Humidity: Press HUMIDITY button to select target level (35%-85%).
Select Fan Speed: Press FAN button to choose High, Medium, Low, or Auto.
Timer Programming: Press TIMER to set 24-hour on/off schedule.
Continuous Drain Mode: If using hose, ensure bucket is removed and drain port is open.

CAUTION! Do not operate in temperatures below 41°F (5°C) without auto-defrost enabled.

Specifications

Model: DDR70A2GP
Capacity: 70 pints per day (AHAM verified)
Coverage Area: Up to 4500 sq. ft.
Power Supply: 115V AC, 60Hz, 7.5A
Water Bucket Capacity: 16.9 pints (8 liters)
Noise Level: ≤ 52 dB on High setting
Refrigerant: R410A
Dimensions (HxWxD): 24.4" x 15.4" x 11.8"
Weight: 46.3 lbs
Operating Temperature: 41°F to 95°F (5°C to 35°C)

Controls and Settings

Control Panel: POWER, HUMIDITY, FAN, TIMER, MODE, FILTER RESET.

Display Icons: Current humidity, Set humidity, Fan speed, Timer, Bucket full, Filter clean, Defrost mode.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Speed: High (continuous), Medium, Low, Auto (adjusts based on humidity). Timer: 24-hour programmable on/off cycles. Mode: Continuous dehumidification or Energy Saver (compressor cycles with fan). Filter Reset: Resets filter cleaning reminder after maintenance.

Operation Modes

Normal Mode: Runs continuously until target humidity is reached. Energy Saver Mode: Compressor cycles off when target reached, fan continues. Continuous Mode: Runs compressor and fan continuously regardless of humidity. Laundry Mode: Maximum dehumidification for drying clothes indoors.

Select mode using MODE button.
Adjust humidity setting as needed.
Choose appropriate fan speed for noise/performance balance.
Monitor water collection; empty bucket or ensure continuous drain is functioning.

Tip: Close windows and doors for optimal performance.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty Water Bucket: When full indicator lights, remove and empty bucket.
Clean Air Filter: Remove and wash filter every 2 weeks or when FILTER light illuminates.
Clean Exterior: Wipe with damp cloth; do not use harsh chemicals.
End-of-Season Storage: Empty all water, clean filter, coil, and bucket. Store upright in dry location.
Coil Inspection: Check evaporator coil annually for dust buildup; clean with soft brush if needed.

WARNING! Always unplug unit before performing any maintenance.

Care & Cleaning

Unplug before cleaning. Use mild detergent and damp cloth for exterior. Air filter should be washed with warm water and mild soap, then air-dried completely before reinstalling.

CAUTION! Do not immerse unit in water. Do not use abrasive cleaners on display or controls.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified. This product contains refrigerant that must be disposed of properly by certified technicians. For warranty information and service, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/bucket full	Check power outlet; ensure bucket is properly seated and empty.
Reduced dehumidification	Dirty filter/extreme conditions	Clean air filter; ensure room temperature is within operating range.
Water leaking	Bucket misaligned/drain hose issue	Reinstall bucket; check drain hose for kinks or blockages.
Loud noise	Uneven surface/fan obstruction	Place on level surface; check for objects near fan intake.
Display not working	Power interruption	Unplug for 1 minute, then reconnect; check circuit breaker.
Ice on coils	Low temperature operation	Auto-defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com