Danby Premiere DDR70B3PWP Dehumidifier Manual

The Danby Premiere DDR70B3PWP is a high-capacity 70-pint dehumidifier designed for residential use. It features electronic controls, a digital display, adjustable humidity settings, continuous drainage option, auto-restart, washable filter, and a built-in pump for vertical lift drainage. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital display, Water tank with full indicator, Continuous drain port, Built-in condensate pump, Washable air filter, Casters for mobility.

Feature	Description
Capacity	70 pints per day (at 60°F, 60% RH)
Control Panel	Electronic touch controls with LED display
Humidity Control	Adjustable from 35% to 80% relative humidity
Water Tank	Removable 1.5-gallon bucket with full alert and auto-shutoff
Continuous Drain	Garden hose connection for gravity drainage
Built-in Pump	Condensate pump for vertical lift up to 15 feet
Air Filter	Washable mesh filter for improved air quality
Auto Restart	Resumes previous settings after power interruption
Timer	24-hour on/off programmable timer
Mobility	Four swivel casters for easy movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 6 inches from walls and furniture for proper airflow.
Power Connection: Plug into a dedicated 115V/60Hz grounded outlet.
Initial Check: Ensure water tank is properly inserted and filter is clean.
Drainage Setup: Attach hose to continuous drain port if using gravity drain, or connect pump hose for vertical drainage.

WARNING! Do not use extension cords. Ensure unit is upright before operating.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set Desired Humidity: Press HUMIDITY button to select target level (35%-80%).
Select Mode: Choose between CONTINUOUS, AUTO, or DRY laundry mode.
Timer Setup: Use TIMER button to program automatic start/stop times.
Pump Setup: If using pump, ensure hose is connected and directed to drain location.

CAUTION! Allow unit to sit upright for 24 hours if transported horizontally.

Specifications

Model: DDR70B3PWP
Dehumidification Capacity: 70 pints/day (AHAM at 60°F, 60% RH)
Power Supply: 115V, 60Hz, 7.5A
Water Tank Capacity: 1.5 gallons
Pump Lift Height: Up to 15 feet vertically
Operating Temperature: 41°F to 95°F
Air Flow: 188 CFM
Refrigerant: R410A
Dimensions (HxWxD): 24.4" x 15.0" x 11.4"
Weight: 46.3 lbs

Controls and Settings

Access all functions via electronic control panel. Display shows current humidity, set point, timer, and alerts.

Control Buttons: POWER, HUMIDITY (up/down), MODE (Continuous/Auto/Laundry), TIMER (set hours), PUMP (on/off), FILTER (reset indicator).

Humidity Settings: Adjustable in 5% increments from 35% to 80%. Modes: CONTINUOUS (runs constantly), AUTO (cycles based on set point), LAUNDRY (high fan for drying clothes). Timer: Program up to 24 hours for automatic operation. Pump: Activate for vertical drainage. Filter Reset: Press after cleaning filter.

Connecting Drainage

Two drainage options: gravity continuous drain or pump-assisted vertical drain.

Gravity Drain: Attach standard garden hose (¾") to drain port at back. Ensure hose runs downward to floor drain.
Pump Drain: Connect included hose to pump outlet. Route hose upward (max 15 ft) to sink, drain, or outside.
Select Drain Mode: On control panel, press PUMP button to activate pump drainage.

Tip: For pump use, ensure hose is not kinked and outlet is clear.

Operating Modes

Supports multiple operating modes for different needs.

Auto Mode: Unit runs until set humidity is reached, then cycles on/off to maintain.
Continuous Mode: Runs continuously regardless of humidity level.
Laundry Mode: High fan speed to dry clothes in enclosed space.
Timer Operation: Set unit to turn on/off at specific times within 24-hour period.
Pump Operation: Enable when vertical drainage is required.

WARNING! Do not operate below 41°F; coil may freeze. Use in enclosed spaces only.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean Filter: Remove and wash filter every 2 weeks or as needed. Press FILTER reset after cleaning.
Empty Water Tank: Empty bucket when full indicator lights or use continuous drain.
Clean Exterior: Wipe cabinet with damp cloth. Do not use harsh chemicals.
End-of-Season: Empty tank, clean filter, and store in upright position in dry area.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only; do not immerse in water.

CAUTION! Never use gasoline, solvents, or abrasive cleaners. Keep water away from electrical components.

Regulatory Information

This dehumidifier complies with FCC Part 15 Class B limits for residential use. UL listed. Energy Star certified. Copyright © Danby Products Inc. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check outlet; ensure tank is empty and properly inserted.
Reduced moisture removal	Dirty filter/low temperature	Clean filter; ensure room temp above 41°F.
Pump not working	Hose blockage/air lock	Check hose for kinks; prime pump by briefly tilting unit.
Continuous running	High humidity/set point low	Adjust humidity set point higher; allow time to reach level.
Error codes on display	Sensor/component fault	Unplug for 5 minutes, restart. If persists, contact service.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-263-2629; www.danby.com