Danby Premiere DDRSOA1GR Dehumidifier Manual

The Danby Premiere DDRSOA1GR is a high-capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, digital display with humidity readout, 24-hour timer, auto-restart function, washable air filter, and energy-efficient operation. Ideal for basements, living areas, and other spaces up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, Removable water bucket with full indicator, Continuous drain hose connection, Washable air filter, Casters for mobility, Handle for transport.

Installation & Placement

Unpack and inspect contents. Choose appropriate location for optimal performance.

1. Clearance: Allow at least 12-18 inches of space around unit for proper airflow.
2. Level surface: Place on flat, stable surface to prevent vibration and noise.
3. Temperature range: Operate in temperatures between 41°F (5°C) and 95°F (35°C).
4. Avoid obstacles: Keep away from curtains, furniture, and other obstructions.
5. Power source: Plug directly into grounded 115V outlet; avoid extension cords.

WARNING! Do not operate in temperatures below 41°F (5°C) to prevent coil freezing. Ensure unit is upright for at least 24 hours before first use if transported horizontally.

First-Time Setup

Position unit and prepare for operation.

1. Install air filter: Ensure washable filter is properly seated in front grille.
2. Insert water bucket: Slide bucket into position until it clicks into place.
3. Power connection: Plug into dedicated 115V outlet.
4. Initial settings: Press POWER button, set desired humidity using UP/DOWN arrows.
5. Test operation: Allow unit to run for 15-20 minutes to ensure proper function.
6. Continuous drain setup (optional): Attach garden hose to drain port if desired.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt or turn upside down during operation.

Specifications

• Model: DDRSOA1GR
• Capacity: 70 pints per day (at 60°F, 60% RH)
• Coverage Area: Up to 3000 sq. ft.
• Power Requirements: 115V, 60Hz, 7.5A
• Water Bucket Capacity: 16 pints (removable)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Noise Level: ≤ 52 dB
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 46.3 lbs
• Refrigerant: R410A
• Certifications: Energy Star, ETL Listed

Controls and Settings

Digital control panel located on top of unit.

Buttons: POWER, MODE, TIMER, UP/DOWN arrows, FAN SPEED, TURBO.

Display Indicators: Current humidity, Set humidity, Timer, Full bucket, Filter clean, Turbo mode, Continuous drain.

Settings: Humidity control (35%-85% in 5% increments), Fan speed (High/Low), Operation mode (Normal/Continuous/Turbo), Timer (1-24 hours), Auto-defrost (automatic in low temperatures).

Operation Modes

Multiple operation modes for different needs.

1. Normal Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
2. Continuous Mode: Runs continuously regardless of humidity level (for very damp conditions).
3. Turbo Mode: Maximum moisture removal with higher fan speed.
4. Timer Mode: Set unit to turn on/off at specific times (1-24 hour programming).
5. Auto Mode: Automatically selects appropriate fan speed based on humidity level.

Tip: For energy savings, set humidity to 50-55% for most living spaces. Lower settings increase energy consumption.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Check water bucket; empty when full indicator lights.
2. Weekly: Clean air filter under running water; allow to dry completely before reinstalling.
3. Monthly: Clean exterior with soft, damp cloth; never use harsh chemicals.
4. Seasonal: Clean condenser coils with soft brush; check drain hose for obstructions.
5. Off-season: Empty and clean bucket, run fan for 30 minutes to dry interior, store upright in dry location.

WARNING! Always unplug unit before cleaning. Do not immerse in water or use abrasive cleaners.

Drainage Options

Two methods for water removal.

1. Bucket Collection: Standard method; unit stops when bucket is full (indicator light). Empty bucket by lifting straight up and pouring out water.
2. Continuous Drain: Attach standard garden hose (not included) to drain port at back of unit. Ensure hose runs downward to floor drain or sink. Unit will operate continuously without interruption.

Note: For continuous drainage, unit must be level or slightly tilted toward drain hose. Check hose regularly for kinks or blockages.

Energy Saving Tips

Maximize efficiency and reduce operating costs.

• Close windows and doors in room being dehumidified.
• Set humidity to 50-55% rather than lower settings.
• Use timer to run during most humid parts of day (typically afternoon/evening).
• Ensure air filter is clean for optimal airflow.
• Use in smallest enclosed space possible for fastest results.
• Consider using multiple smaller units rather than one large unit for multiple rooms.

Regulatory Information

ETL Listed: Meets safety standards for the United States and Canada. Energy Star Certified: Meets energy efficiency guidelines set by the U.S. Environmental Protection Agency. FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © Danby Products Inc. All rights reserved. For support, visit www.danby.com or contact 1-800-263-2629.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset control system.

Service: 1-800-263-2629; www.danby.com