Danby Simplicity SDR506RH Dehumidifier Manual

The Danby Simplicity SDR506RH is a 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, a continuous drain option, a full-bucket alert with auto-shutoff, a washable air filter, a 24-hour timer, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Water collection bucket, Washable air filter, Continuous drain hose connection, Casters for mobility.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment
Water Capacity	50 pints per day (at 60% RH, 80°F)
Continuous Drain	Option for hose connection for unattended operation
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
Washable Air Filter	Removable filter for easy cleaning
24-Hour Timer	Programmable on/off timer
Digital Display	Shows current humidity, settings, and alerts
Casters	Four wheels for easy mobility
Auto Restart	Resumes previous settings after power interruption
Energy Efficient	Low power consumption design

Installation

Unpack and inspect contents. Place on level, stable surface.

Position the unit: Ensure at least 12 inches of clearance on all sides for proper airflow.
Install casters: Attach all four wheels to the base if not pre-installed.
Check filter: Ensure washable air filter is properly seated.
Connect to power: Plug into a dedicated 120V AC outlet.
For continuous drain: Attach hose to drain port and route to floor drain or sink.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure the unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Set desired humidity: Use UP/DOWN buttons to select target humidity (30%-80%).
Select mode: Choose between Continuous, Auto, or Timer mode.
Check bucket: Ensure empty and properly inserted.
Set timer (optional): Program 24-hour on/off schedule if needed.
For continuous drain: Insert drain hose and select "Continuous" mode.

CAUTION! Handle with care; the unit contains refrigerant. Do not puncture coils.

Specifications

Model: SDR506RH
Capacity: 50 pints per day (AHAM at 60% RH, 80°F)
Coverage Area: Up to 3000 sq. ft. (depending on conditions)
Power Supply: 120V AC, 60Hz
Power Consumption: 4.5 Amps
Refrigerant: R410A
Water Bucket Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 52 dB
Dimensions (HxWxD): 24.2" x 15" x 11.4"
Weight: 41 lbs

Controls and Settings

Control Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER indicator, FULL BUCKET indicator.

Display: Shows current room humidity, target humidity, mode, timer status, and alerts.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TIMER (programmed operation). Humidity Setting: Adjust between 30% and 80% in 5% increments. Timer: Set 1-24 hours for automatic start/stop. Filter Alert: Indicator lights when filter needs cleaning. Bucket Full: Indicator lights and unit shuts off when bucket needs emptying.

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs constantly until turned off or bucket is full. Timer Mode: Program to run for specific periods.

Press POWER to turn on.
Press MODE to cycle through Auto, Continuous, Timer.
In Auto mode: Use UP/DOWN to set desired humidity.
In Timer mode: Press TIMER, then UP/DOWN to set hours.
Monitor display for current humidity and alerts.

Tip: For maximum efficiency, keep doors and windows closed while operating.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty bucket: Regularly check and empty water collection bucket.
Clean filter: Remove and wash air filter every 2 weeks or as needed.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check coils: Keep condenser coils free of dust and debris.
Off-season storage: Empty bucket, clean unit, and store in dry place.

WARNING! Always unplug unit before performing any maintenance.

Care & Cleaning

Unplug before cleaning. Use mild detergent and damp cloth only; do not immerse in water.

CAUTION! Do not use gasoline, thinners, or abrasive cleaners. Keep water away from electrical components.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Check power cord connection; ensure outlet is working; check circuit breaker.
Not removing moisture	Temperature too low	Ensure room temperature is above 41°F (5°C); check filter for blockage.
Bucket full light on	Bucket full or not seated	Empty bucket; ensure properly inserted and seated.
Filter light on	Dirty filter	Remove and clean washable air filter.
Unit freezing up	Low temperature/dirty filter	Turn off and let ice melt; clean filter; ensure room temp above 41°F.
Loud noise	Loose parts/obstruction	Ensure unit is level; check for objects near fan; tighten any loose panels.
Water leakage	Bucket/drain hose issue	Ensure bucket properly inserted; check drain hose connection for continuous drain.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-263-2629; www.danby.com