Danby Simplicity SHCC6026 Dehumidifier Manual

The Danby Simplicity SHCC6026 is a portable dehumidifier designed for residential use, capable of removing up to 60 pints of moisture per day. It features a 6.5-gallon water tank with a full-tank alert, continuous drainage option, adjustable humidity control, auto-restart function, and a washable air filter. Ideal for basements, living areas, and other spaces up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable cabinet with casters, 6.5-gallon water tank, Control Panel, Air intake grille, Exhaust grille, Continuous drain hose connector, Power cord.

Feature	Description
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Tank Capacity	6.5 gallons with full-tank indicator and auto-shutoff
Continuous Drainage	Option for hose connection (hose not included)
Air Filter	Washable mesh filter for dust and particles
Auto-Restart	Resumes previous settings after power interruption
Portability	Built-in handles and casters for easy movement
Control Panel	Digital display with humidity readout and timer
Power Indicator	LED shows unit is on
Full Tank Alert	Light and audible alarm when tank needs emptying
Defrost Function	Auto-defrost in low-temperature conditions

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Ensure at least 12 inches of clearance on all sides for proper airflow.
Water Tank: Insert tank securely until it clicks into place.
Continuous Drain (optional): Attach 5/8" inner diameter hose to drain port at rear.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure outlet is properly grounded.

First-Time Setup

Plug in unit; control panel will illuminate.

Set Humidity Level: Press HUMIDITY button to select desired RH (35%-85%).
Select Mode: Choose CONTINUOUS or AUTO (cycles based on set humidity).
Timer (optional): Use TIMER button to set automatic on/off schedule.
Check Filter: Ensure washable filter is clean before first use.

CAUTION! Do not operate with empty water tank. Always handle tank with both hands.

Specifications

Model: Danby Simplicity SHCC6026.
Moisture Removal: 60 pints per day (at 80°F, 60% RH).
Coverage Area: Up to 3000 sq. ft.
Water Tank: 6.5 gallons.
Power Supply: 115V AC, 60Hz, 6.5A.
Operating Conditions: 41°F to 95°F.
Noise Level: ≤ 52 dB.
Dimensions (HxWxD): 23.6" x 15.4" x 11.8".
Weight: 41.9 lbs.
Refrigerant: R410a.

Controls and Settings

Access via digital control panel on top of unit.

Buttons: POWER, HUMIDITY (+/-), MODE (Continuous/Auto), TIMER (1-24 hours), FILTER RESET.

Display: Current room humidity, Set humidity, Timer status, Full tank alert, Filter alert. Modes: CONTINUOUS (runs non-stop), AUTO (cycles to maintain set humidity). Timer: Program on/off delay from 1 to 24 hours. Filter Reset: Press after cleaning filter to reset reminder light.

Connecting Drainage

For continuous operation, connect hose to drain port.

Turn off and unplug unit.
Remove drain cap from rear port.
Attach 5/8" ID hose (not included) securely.
Route hose to floor drain or suitable container.
Ensure hose has downward slope without kinks.

Tip: When using continuous drain, ensure water tank is empty and properly seated.

Operation Modes

Supports AUTO and CONTINUOUS dehumidification.

Auto Mode: Unit runs until set humidity is reached, then cycles on/off to maintain.
Continuous Mode: Runs constantly regardless of humidity level.
Timer Operation: Set delay start or auto shutoff (1-24 hours).
Defrost Cycle: Automatically activates when coil temperature drops below 41°F.
Full Tank Alert: Unit beeps and light flashes; power cuts off until tank is emptied.

WARNING! Do not operate in temperatures below 41°F or above 95°F. Do not block air vents.

Maintenance & Cleaning

Unplug before maintenance. Clean every 2 weeks for optimal performance.

Water Tank: Empty regularly; clean with mild detergent and rinse thoroughly.
Air Filter: Remove, wash with warm water, dry completely before reinstalling.
Exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.
Grilles: Use vacuum attachment to remove dust from intake and exhaust.

CAUTION! Never immerse unit in water. Do not use chemicals on water tank.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified. This product contains refrigerant; dispose of according to local regulations. For support, visit www.danby.com or contact 1-800-263-2629. Copyright © Danby Products Inc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power/no tank	Check outlet; ensure tank is properly inserted; reset circuit breaker.
Not dehumidifying	Filter/temperature	Clean filter; ensure room temp is between 41°F-95°F.
Water leaking	Tank/drain hose	Ensure tank is seated; check drain hose connection for leaks.
Loud noise	Uneven surface	Place on level floor; check for loose parts.
Full tank alert not working	Float mechanism	Check for obstruction in tank; clean float assembly.
Ice on coils	Low temperature	Defrost cycle should activate; move to warmer area if persistent.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-263-2629; www.danby.com